Hazard information system information card sample. New Design Hazard Information System Information Card

1 Apply dry substances

Do not use water!

2 Use water jets 3 Use water spray or fine jets 4 Apply foam 5 Prevent substances from entering wastewater D Breathing apparatus and protective gloves P Breathing apparatus and protective gloves only in case of fire TO Full protective clothing and breathing apparatus E Evacuation of people is necessary * - code of emergency measures in case of fire or leak │

** - danger sign according to GOST 19433-88 │

*** - N UN

SIO information tables are produced by organizations producing hazardous substances and presented to motor transport organizations for installation in front and behind the vehicle perpendicular to its longitudinal axis, but without overlapping license plates and external lighting devices and without protruding beyond the dimensions of the vehicle. Devices for fastening tables must ensure their reliable fixation. Information tables are made of fire-resistant materials. The overall dimensions of the SIO information tables must correspond to the drawing (see Fig. 1). When making and painting tables, it is recommended to comply with the following requirements:
- the general background of the tables is white;
- background graph KEM and N UN orange;
- the table frame, graph division lines, numbers and letters of the text are made in black;
- the name of the column (KEM, UN N) and the inscription in the danger sign “Spontaneously combusts” are written in white;
- the frame of the danger sign is applied in black at a distance of 5 mm from the edges of the sign with a line having a thickness of at least 5 mm;
- the thickness of the letters in the KEM and UN N columns is at least 15 mm, on the danger sign at least 3 mm;
- the thickness of the frame and dividing lines of the table is 10 mm, the alphanumeric code of emergency measures is written in any order of letters and numbers.

The paints used in the manufacture of tables must be reflective and resistant to the effects of transported dangerous goods.

The SIO emergency card is filled out using a unified form at the organization that produces the goods and is attached in addition to the waybill. The emergency card must be on the vehicle transporting dangerous goods or on the cover vehicle. When a dangerous cargo is accompanied by a representative of the consignor (consignee), the emergency card is with him.
The SIO information card is made on thick paper measuring 130 mm by 60 mm. On the front side of the card there is a decoding of the SIO information tables, on the reverse side there are examples of danger signs. The numbers indicate the EMC in case of fire and leakage, as well as information about the possibility of substances getting into wastewater. The letters indicate KEM for protecting people. The choice of letters is made based on the initial letters of the most characteristic words of the code used:
D - breathing apparatus and protective gloves are required;
P - breathing apparatus and protective gloves are required only in case of fire;
K - full protective clothing and breathing apparatus are required;
E - evacuation of people is necessary.

In the event of an incident during the transportation of dangerous goods, measures to eliminate its consequences are carried out in accordance with the instructions of the SIO emergency card or emergency measures code according to the information table of the SIO. Full identification of the dangerous cargo being transported is carried out using the UN number available in the information table and the SIO emergency card, as well as in the application for the transportation of this cargo.

Vehicle bodies, tank trucks, trailers and tank semi-trailers permanently engaged in the transportation of dangerous goods must be painted in the identification colors established for these goods and have the appropriate inscriptions:
- when transporting methanol, the vehicle (tank) is painted orange with a black stripe and the inscription “Methanol is poison!” is made in orange paint on the side;
- when transporting ammonia, the color of the vehicle is any and the inscription “Ammonia water. Flammable”;
- when transporting substances that emit flammable gases when interacting with water, the vehicle is painted blue and marked “Flammable”;
- when transporting spontaneously combustible substances, the lower part of the vehicle (tank) is painted red, the upper part is painted white and the inscription “Flammable” is written in black;
- when transporting flammable substances, the vehicle (tanks) is painted orange and marked “Flammable”;
- when transporting substances that support combustion, the vehicle (tank) is painted yellow and marked with the double inscription “Flammable”/”Corrosive”;
- when transporting corrosive substances, the vehicle (tank) is painted yellow with a black stripe along the side, on which the inscription “Corrosive Substance” is written in yellow.

The height of the letters of the inscriptions applied to vehicles transporting dangerous goods must be at least 150 mm, black, except in special cases.

The organization of SIO is entrusted to motor transport organizations with the technical assistance of shippers and consignees, provided for in the contract for the transportation of dangerous goods, the qualitative characteristics of which are given in the certificate (Form 6).

The hazard information system adopted for road transport in the Russian Federation is established and described in detail in the Instructions for the Safe Transport of Dangerous Goods of 1985.

Rice. 9. Vehicle information table:

1. Danger sign according to GOST 19433-88;

2. Code of emergency measures in case of fire or leak;

The hazard information system for road transport in the Russian Federation currently consists of:

1) information table for designating the vehicle;

2) SIO emergency card to determine measures to eliminate the consequences of an accident;

3) an information card of the hazard information system to decipher emergency codes (ECM) indicated on the information tables.

The hazard information system uses hazard signs in accordance with GOST 19433-88, applied both to the container in which the dangerous cargo is packaged, and to information tables indicating the vehicle transporting the dangerous cargo (the hazard sign of the most dangerous cargo of several transported together is indicated vehicle).

On the information table, in addition to the danger sign, the number of measures of the substance according to the UN list and the code of emergency measures are indicated.

An example of filling out a vehicle information table is shown in Fig. 9

Information tables for designating vehicles must be produced in compliance with the following requirements:

The general background is white;

The background columns “KEM” and “UN No.” are orange;

The table frame, graph division lines, numbers and letters of the text are drawn in black;

The name of the column (KEM, UN N) and the inscription in the danger sign are in white;

The frame of the danger sign is drawn with a black line at least 5 mm thick at a distance of 5 mm from the edges of the sign;

The thickness of the letters in the columns “KEM” and “UN No.” is 15 mm, and on the danger sign at least 3 mm;

The frame and dividing lines of the table are applied with a thickness of 15 mm.

The danger sign and UN N indicate that the dangerous cargo belongs to a certain class (its correct transport (international name), and the type of danger that the cargo represents (hazard symbols are presented in Appendix 3).

The emergency measures code allows (if there is an information card that deciphers it), along with the emergency card of the hazard information system, to carry out measures to eliminate the consequences of an accident or other emergency situation.

Numerical symbols of the emergency measures code indicate actions in case of fire and leakage, while alphabetic symbols indicate emergency measures to protect people.

The dimensions of the Information Table, its coloring and installation on the vehicle (in front on the right side of the bumper, in the back - on the rear wall of the body, without blocking license plates and lighting devices and without going beyond the dimensions of the vehicle) are determined by the Instructions for ensuring the safety of the transportation of dangerous goods. The table is installed on the vehicle transporting the given cargo, and after unloading it and cleaning the container, it is removed.

The information card of the hazard information system is provided to internal affairs bodies that control the transportation of dangerous goods.

The information card contains a breakdown of the digital and alphabetic codes:

1 - NO WATER. APPLY! USE DRY. FIRE EXTINGUISHING AGENTS!

2 - USE WATER JETS.

3 - USE SPRAYED WATER.

4 - USE FOAM OR BASED COMPOUNDS. KHLADONOV.

5 - PREVENT ENTRY. SUBSTANCES IN WASTE. WATER AND RESERVOIR.

D - BREATHING APPARATUS AND PROTECTIVE EQUIPMENT REQUIRED. GLOVES.

P - BREATHING APPARATUS AND PROTECTIVE EQUIPMENT REQUIRED. GLOVES ONLY IN FIRE.

K - FULL PROTECTIVE CLOTHING AND BREATHING APPARATUS REQUIRED

E - EVACUATION OF PEOPLE IS NECESSARY

The SIO emergency card during transportation is attached to the waybill and is kept by the driver or accompanying person and actually ensures that the correct emergency measures are taken in the event of an emergency, as well as the possibility of investigating the causes of the accident.

The emergency card is filled out by shippers and consignees based on the conditions of safe transportation, GOSTs, OSTs, and manufacturers' technical specifications for specific hazardous substances and products.

The emergency card includes the following provisions:

Technical name of the hazardous substance;

Other names (synonyms);

Class and subclass of hazardous substance;

Emergency Measures Code (EMC);

The number assigned to the substance according to the UN list;

The maximum gross mass of the substance or the mass of one package and their maximum quantity that can be transported on one vehicle;

A limited gross quantity of a substance or the number of packages on one vehicle that can be transported as non-dangerous cargo;

Explosiveness of the substance;

Fire hazard of the substance;

Hazards to living organisms;

Personal protective equipment for respiratory organs, eyes, skin;

First aid measures in case of inhalation, in case of respiratory arrest, in case of contact with eyes and skin, in case of ingestion;

Actions in case of damage to containers (packaging) and other possible emergency situations;

Methods and means of neutralization;

Actions in case of a road traffic accident;

Actions in case of vehicle breakdown;

Organization responsible for transportation;

Person responsible for transportation.

The emergency card of the safety information system in road transport is in many ways similar to the railway one, however, the railway rules provide already compiled cards for all transported hazardous substances, while the above form is filled out anew each time by each shipper.

The sign prohibits opening and damaging containers during transportation and storage and is applied when the cargo is especially sensitive to environmental influences. The “and” sign means “Keep away from radiation”. The sign indicates that any type of radiation can affect or change the properties of the cargo (for example, undeveloped photographic films). The sign “k” means “Keep away from heat and radiation.” The symbol indicates that heat or radiation penetration may reduce or destroy the value of the cargo. The “l” sign means “Stacking is prohibited.” It is not allowed to place other cargo on cargo with this sign during transportation and storage. The "m" sign means "Open here". Cargo with this sign is opened only in the specified place.

Hazard information system (HIS) emergency card

In the case of moving unsafe items, the sender and the recipient must enter into a contractual document between themselves. It is distinguished by the red imprint “Dangerous Goods” in the upper right corner of the front page.
The agreement contains the following information:

• Shipping Name;
• its physicochemical properties;
• tools to protect transported goods and eliminate accidents;
• a copy of the contents of the emergency card.

Description of the document The dangerous goods card contains important information on both sides:

• External: decoding of information symbols of the HIS (hazard information system).
• Verso: examples of danger symbols, behavior in case of fire of a substance, work when toxic compounds enter wastewater, rules for protecting people.

An emergency card is just one of the designations and descriptions of dangerous cargo.

Hazard information system emergency card

Substances with a relatively low solid and liquid content. from +61 °C to +100 °C 9.1 — — + + — — + + + hazardous during transportation caustic and corrosive under certain conditions 9.2 — — + + — — + + + slightly toxic irritant 9.3 — — + + — — + + + having increased pressure in the package 9.4 — — + + — — + + + COMPATIBILITY TABLE FOR TRANSPORTATION OF DANGEROUS GOODS AND GENERAL PURPOSE GOODS Appendix 7.15 Classes and subclasses of dangerous goods List of general purpose goods prohibited for joint transportation 1. Flammable. 2.1 There are no prohibitions. 2.2 Food, bakery, perfumery, cosmetics, pharmaceutical, household items.
2.3 Flammable, mineral, vegetable and animal fats. 3 Flammable, food, household items, loads that are afraid of getting wet. 4.1; 4.2 Flammable, food grade. 4.3 Flammable food cargo containing aqueous solutions.

Dangerous cargo

C; - dissolved under pressure; - liquefied by supercooling; - aerosols and compressed gases subject to special regulations; subclass 2.1 - non-flammable gases; subclass 2.2 - non-flammable poisonous gases; subclass 2.3 - flammable gases; subclass 2.4 - flammable poisonous gases; subclass 2.5 - chemically unstable; subclass 2.6 - chemically unstable toxic. CLASS 3 - flammable liquids, mixtures of liquids, and liquids containing solids in solution or suspension that emit flammable vapors having a closed cup flash point of 61 degrees.
C and below; subclass 3.1 - flammable liquids with a low flash point and liquids having a flash point in a closed crucible below minus 18 degrees.

Ugra training center

What makes it possible for the driver to have an information card about the cargo being transported? 1 Answer 1 399 views Add to favorites View answer The answer to this and ALL OTHER QUESTIONS Will become available after receiving extended access Tags: Transportation of dangerous goods class 1 11/20/2017 We have ADRs for the driver, tractor and semi-trailer. It is necessary to transport fireworks under a cargo transportation contract.

Do I need an emergency card? (there are information instructions on 4 pages). Which document should I refer to if traffic police officers demand a card? 7 1 Answer 575 views Add to favorites View answer Tags: Emergency card - availability 06/18/2013 In what cases should the driver have an emergency card? 1 Answer 5,560 views Add to favorites View answer Tags: Emergency SIO card in ADR 12/11/2017 Please tell me which clause of ADR provides for an emergency SIO card.

Information card

Toxic, flammable, oxidizing, corrosive.

• Highly flammable liquid masses.
• Flammable materials. Solid, capable of spontaneous combustion, emitting gases that quickly ignite on contact with water.
• Organic peroxides and oxidizing elements.
• Infectious and toxic materials.
• Radioactive components.

  
  Alpha, beta, gamma rays, fissile elements.

• Corrosive and caustic components.
• Other hazardous components. Solid and liquid environmental pollutants, lithium batteries, genetically modified organisms, etc.

Objectives of the document Both the emergency hazard information system (HIS) card and all other documents for dangerous goods necessarily contain a hazard number code according to the UN classification.
KJ└╣W┬1М4JSй$╣UХH╓9ВqeМ%ЛП╞ K tPъ]╥1│s═┘1╗,5Би╛Г├Х▀7T▄p╕╬<с╡:╛Кэ÷u9╤,▄ i╩Л8^╓╙╞uzр/3╬яц0┴╟ёФЩ┐∙a┐Cць&sV$3%°е2O╣~аK≥╡бT |о2└╚uн^ЕY7ышqхШ├l/’х▓в]l╠▒ кr╦.Tw╦U╘I┌уи@0Ь=.т├К^%еk≤Ю Cф┼Х╕pзо╤│ °╦:O{Eуг)╛MP1ь▓d╫OV©┐ш╙aвй ‘┌Kк╣M7П┐фъj·lW┌╫ %СН≥╕F╠─▀7╢│XЖБ?ьВУaЛШЖ╧╦q2яC╖║°^ЮК~\С,]#Ю*Щ Чёhn9▐Юt:хцб<╠╖’╣щFWРЧ·╠]р╛*S»├1^$UCЧ╤Н[О%ыфЖ▒WЕм╛р9╘Щ─МШR╜╠┤iVeЕ}√ux┌ё7╡└Y╤f sUЕabсе%╨Ё Ь▀╩m╚0║Ы{Uz▐U║Цд│╟-!▒=╦псЙч:ё▒┘*┬юU╚╚8©T▀Оз╘╬WВDЕ5:≥!eЭН▓о┴╕■LКг╡ТуVшZ⌠МЗодЭф┴»С3Г’╚Ав╫Е^r⌠о╤*OЩВV╝я[≥е\Kл╣Ку9в┌[,Adгу⌠╦ ж{▀7o»vэбCN4fа╡ч║вCУЦ═Зщ1:\ЫЦ∙бА╡EЖ©├┌иvл^⌠в|аЖь╣┘Zф▀Y·=╪0Ки┼v⌡шq<╪pЖ╦╢·▌/dТ⌡ЫЮЬъ9╬─вг┼╚/tBU╒л=ш█╧ip©НB<┘яш+сцУйЩGСЖ▒|≈├НщюЯT©E0©ХV1у ▄НфH√ЖnШ!°-nw╔СёJc├Enixё|╠A÷.Д╤вмt╬┌╖ГчР»-шпmLlW▓╥Ы═Ы[≈╜ r2GвiДdЪq┐Ф/;ж²Ь]©┼sГ╦я≥tue:QМ╨ Е╨в╥NБ╡Це╤y╢v<бЁсЛд9LДЙд[≥j╓у’\╤╬-≈и╦GLу3Щk(ш6ж╝PЫН╪CHКЁщ1╘vФ⌡┼≤≥Hе Lф.

Organize a cordon, call the fire department, medical assistance, emergency response specialists, etc.

• In case of spillage and collapse: stop driving in the accident area, remove bystanders from it. Eliminate sources of sparks, open flames, etc.
• In case of fire: stop the train in a safe place, eliminate the source of fire using foam, water, carbon dioxide, etc.

• First aid: in case of poisoning by combustion products, give oxygen to the injured person.

  Applying aseptic dressings to burns, wound surfaces, etc.

An emergency card is an important document that not only contains information about dangerous cargo, but also data on its safe transportation, actions in case of an emergency, and measures to save people.

New sample transportation of dangerous goods information card download

Attention

Class 8 Caustic/corrosive; 8 Class 9 Other dangerous substances which, during transport, pose a hazard not covered by other classes; 9<* При транспортировании пестицидов в пределах Российской Федерации в транспортной таре, являющейся одновременно и потребительской, допускается для грузов подкласса 6.1 наносить знак опасности по черт. 10, а для грузов подкласса 9.1 по черт. 10 или 11 в соответствии с нормативно — технической документацией на продукцию. 2. Описание знаков опасности Номер чертежа Символ опасности (черного цвета) Цвет поля 1 2 3 1 Взрывается бомба Оранжевый 2 Символ не наносится.
The numbers are printed in black 1.4 Orange 3 The symbol is not printed.

New sample information card for transportation of dangerous goods

The sign is applied to the container when the use of hooks during loading and unloading operations is unacceptable (load in soft containers, in bales, etc.) The sign “in” means “Top. Don't turn over." The sign is applied to the container when the package must be in the specified position during any manipulations with it.

The “g” sign means “Keep away from heat.” The sign is applied to the container when the cargo should be protected from heating. The sign “d” means “Location of slinging”. The sign is applied to the container when the cargo should be slung only in certain places.

The “e” sign means “Keep away from moisture.” The sign is applied to the container when the cargo must be protected from dampness. The sign “g” means “Center of Gravity”. The sign is applied to large containers when the center of gravity of the cargo is outside the geometric center.

The sign “z” means “Sealed packaging”.

Dear readers! The article talks about typical ways to resolve legal issues, but each case is individual. If you want to know how solve exactly your problem- contact a consultant:

APPLICATIONS AND CALLS ARE ACCEPTED 24/7 and 7 days a week.

It's fast and FOR FREE!

According to them, a license is required to transport dangerous goods (DG) and to obtain and comply with it when carrying out activities. One of them is labeling.

What does this mean

Any cargo, its packaging, and transport vehicles must be marked. She talks about the type of internal contents and the hazard class. The goal is to inform others.

The notation system allows:

• draw the attention of all traffic participants, including pedestrians, to the dangerous vehicle (VV). This is required for careful and careful driving, performing complex maneuvers near such a car, limiting certain actions (do not smoke, do not light a fire);
• notify regulatory authorities about the passage of the exhaust gas;
• inform the Ministry of Emergency Situations about the category of transported substances in the event of liquidation of an accident.

The warning system consists of the following elements:

1. Information cards. They enable first responders to perform the necessary actions in emergency situations.
2. Information signs. Placed in front and behind the vehicle.
3. Emergency cards for a planned course of action in case of an accident.
4. Identification inscriptions, paint for vehicles involved in the delivery of exhaust gas.

The designation plate is designed according to the characteristics of each type of cargo and the precautions required for it. As a rule, this is a visual color picture, supplemented with digital and letter symbols.

Each of the symbols corresponds to a list of specific actions. The abbreviation “ECM” stands for Emergency Measures Code, which defines the above requirements.

KEM is required:

• to properly eliminate the consequences of accidents;
• determining the causes of the accident.

An example of possible consequences is extinguishing potassium or sodium with water. Their interaction can provoke a fire, resulting in a large-scale fire. The reason for this may be the lack of the required sign.

A similar situation occurs when water is poured over petroleum products, since H2O molecules upon contact lead to splashing and contamination of a large area by petroleum products.

When and where to apply

CEM is applied not only to vehicles, air, sea or railway, during the transportation of exhaust gas, but also during its storage. If additional packaging is removed, the markings must be transferred to the cargo or its other packaging.

Thus, the main places for attaching symbols are:

• container;
• container, wagon, car body;
• vehicle information plate;
• emergency card;
• information card.

Small signs are used for containers and containers. Their size may vary, depending on. The main requirement is visibility over long distances, including at night.

Plates must be produced according to certain requirements. Failure to comply may result in license revocation and fines.

The situation is similar with emergency cards. They indicate:

• OG name;
• physical properties: melting point, boiling point, density, volatility, ability to dissolve;
• degree of fire and explosion hazard;
• influence on living organisms: toxic effect, damage to the skin;
• necessary actions to help the victims;
• methods of eliminating fire and other influences;
• list of protective equipment effective in emergency situations (ES).

Important! The document must have the signature of the head of the organization and a seal.

Technical requirements for design and use in transport

The requirements for warning signs attached to vehicles are standard.

Prerequisites for cards:

1. Paper characteristics: thick.
2. Size: 130 * 60 mm.
3. On the front side information about the contents of the container, decoding of codes, and other mandatory information is indicated.
4. An explanation of all signs is written on the inside in accordance with.

Important! Using several versions of documents located in different places allows you to quickly determine the required course of action in an emergency without wasting time finding one.

The basis of KEM is a set of numbers and letters. They can be arranged in any order. We will present more detailed information in the form of tabular information.

Table 1. Decoding of numbers in the code of emergency measures.

Writing 2 numbers indicates the possibility of using only those methods that mean them. In this case, special care is required.

The letter part in the inscriptions determines the degree of protection that should be observed during the elimination of a fire or other emergency situations.

Table 2. Letter designations of FEM.

As an example, consider the entry for the transportation of gas gasoline “345 D”. Based on the decoding, it should be concluded that in case of fire, the use of water from a spray gun, foam, and coolants is allowed.

In this case, everything possible must be done to prevent hazardous media from entering the ground and water.

Important! Emergency services employees should work only in gloves and respiratory protective equipment, excluding inhalation of harmful fumes.

New sample information card for the transportation of dangerous goods

Emergency measures warning signs (EMP) are mandatory for all vehicles involved in the transportation of exhaust gases. In 2019, the requirements for them correspond to ADR 2017.

Thus, the emergency card of the hazard information system indicates:

• complete information about the cargo;
• variations of its name and codes;
• information about physical properties is included;
• displayed pictures;
• harm that may be caused;
• flammability.

Depending on the number of vehicles traveling at the same time, the following may be issued:

• individual card in accordance with the type of cargo;
• group if there are several cargoes with substances similar in properties.

The new sample information card is filled out in the same way as the old one, by the organization producing the OG according to the standard form and attached to it.

On the other side of the sheet, methods of control and precautions that should be taken in emergency situations are described.

Also, the reverse side of the information card must contain the pictograms shown in the table.

The signs are made square. Information on them is written according to GOST 19433-88. Dimensions about 190 by 190 mm. The classification of all exhaust gases is divided into 9 classes of substances according to hazard.

Table 3. Hazard classes of substances.

Main classes also have subclasses.

Table 4. Example on gases.

Requirements for signs according to ADR:

1. The UN number is written on top, and the OG identification number on the bottom.
2. The letters are black, 10 cm high, line width 1.5 cm, orange background.
3. The separator is a black solid line 1.5 cm wide.
4. The numbers must be abrasion resistant and do not burn for 15 minutes.
5. The location of the signs must be unchanged relative to the position of the vehicle.

The plate must meet the following requirements:

1. Size 40 * 30 cm.
2. The background is orange, with a protective reflective material on top.
3. A black stripe 1.5 cm wide is applied along the perimeter. The separator is a strip 1.5 cm wide. The height of the columns is about 10 cm, the width is 1.5 cm.

   

   FEM is always applied regardless of the distance traveled or the type of vehicle.

   The inscriptions applied to the packaging have an approximate appearance shown in the figure.

   

   • 1 – danger sign;
   • 2 – manipulation signs;
   • 3 – UN number;
   • 4 – classification code;
   • 5 – transport name.

   Penalty for violations of use

   Failure to comply with the requirements of the Rules for the Transportation of Dangerous Goods, as well as the conditions of the license, is the reason for the cancellation of the document, which regulates.

   Depending on the type of violation and the persons involved, the following types of punishment are provided:

   • fine;
   • confiscation of property, including a car that was involved in transportation;
   • criminal liability.