How to make ksiva of the Ministry of Internal Affairs. How to get and what privileges a Ministry of Internal Affairs pensioner’s certificate contains

There are a lot of offers of this type on the Internet:

“As confirmation, we will send you a video of your rights, and only then you pay the money and we will send you the rights” - this is a scam, I’ll explain to you how it’s done:

The fraudster got hold of a blank form somewhere, he fills it out with washable paint using your data, this is done on a special printer. He films the whole thing on video, you watch the video in amazement and run to send the money! Naturally, no one sent you any licenses, because the video was a dummy. The scammer will wash the paint off the form and fill in the name of the new victim. A real rights seller will never easily waste expensive real forms with every request from previously unknown clients! What if the client doesn’t pay? So what, throw the expensive form in the trash? Every real form costs a lot of money!

These videos are a trick! There are many proposals of this type: “Let’s fix the wiring! Help those who are deprived” - this is a real scam. There are a lot of sites offering similar “postings”. What is the deception?

The deception is that they charge you for “checking the rights database” or “restoring rights after deprivation”; also, some clever people offer “cleaning the database” for those who have been deprived (a very expensive operation, done with a very good acquaintance, for very LARGE amounts, from 100t.r.) AND THEY DON’T SEND ANYTHING! If by some kind of review they managed to persuade you to send your license, for example by letter with the cost imposed, then they will definitely send you some kind of calendar! For which you will pay 20-50t.r. Remember, if they promise to issue a driver’s license with wiring without passing the exam - know that 99% of 100% is a scam. Now official rights can be obtained ONLY! through the receipt window at the traffic police, HAVING SIGNED for receipt! NO other options!

If you find a person who offers to obtain a legal license at a metro station or at its exit, then this person is a scam. Usually the scam occurs in the traffic police building, the person gets lost through the back entrance (there are many options for the development of events) In the best case, they will hand over an envelope with a piece of cardboard in it with your photo (they won’t let you check the quality before paying) they will only show you a photo of a dummy of your license taken on your phone. For a considerable amount of 25-50 thousand, you will buy a cardboard, at worst, they won’t even give you that. Don’t fall for the tricks of scammers; on their websites you can often even find direct Moscow telephone numbers with an “operator”. Don't fall for it! These are “direct” mobiles, issued for left-handed persons!

Remember, if you have been deprived, you have only one option: making a copy of your rights (PLUSH). There are no such wizards who “legally restore rights after deprivation”!!!

Greetings to all site users

I present to your attention:

FSB pension certificate
Typographical printing

SVR pension certificate
Typographical printing

[To view content you must have: 20 messages]

Pension certificate of the Central Internal Affairs Directorate of the Moscow Region
Typographical printing

[To view content you must have: 20 messages]

Pension certificate of the Federal Security Service of Russia
Typographical printing

[To view content you must have: 20 messages]

Pension certificate of the Main Directorate of the Ministry of Internal Affairs of Moscow
Typographical printing

[To view content you must have: 20 messages]

Buy a certificate from the Investigative Committee of Russia, FSO, GUSP, FSKN, etc.

[To view content you must have: 20 messages]

Public offer

Delivery is paid by the buyer, in cases not provided for by other agreements.

Payment is made either by advance payment or through Garant-Service (at the expense of the buyer), in cases not agreed upon with the buyer on other terms.

In cases where the quality of filling out/production of a document/form does not meet the buyer’s expectations, the seller is not responsible.

A couple of examples of my work

I can assist in the acquisition of any certificate with all degrees of protection provided for in the original - the price is determined depending on the complexity of the order, namely the following certificates:

VU, Certificates of the Ministry of Internal Affairs, FSB, Court, Prosecutor's Office.
FSKN*FSSP*SK*MVD*COURT*LAWYER*FSO

My contacts:
Telegramm: @tenevooy ( https://t.me/tenevooy)
Jabber: [email protected]
EMAIL [email protected]
ICQ: 50303611

tags: buy a license, buy a certificate, where to buy a license, international ID, Ministry of Internal Affairs ID, license form download, buy a driver's license, FSB XIV, XIV, service ID, Russian Federation ID, FSB ID, combat veteran ID, combat veteran ID, ID police, private security guard's ID, filling out an ID, journalist's ID, buy a journalist's ID, buy a journalist's ID, get a journalist's ID, a sample journalist's ID, an international journalist's ID, a journalist's ID form, a freelance journalist's ID, make a journalist's ID, the Russian Union of Journalists, buy a document , buy ksiva, ksiva deputy, make ksiva, ksiva org, red ksiva, ksiva certificates, sell ksiva, sell journalist's credentials, sell ksiva journalist, sell certificate, ksiva crusts, where to buy ksiva, you can buy ksiva from us, sale ksiv, ksiva UPC, judge's certificate, deputy's assistant's certificate, org forum templates, preparation of certificates, official journalist's ID, official certificate, order certificate, certificate + to order, buy certificate + in Moscow, cop certificates, buy certificates, buy prosecutor's office certificate , ksiva usb, buy ksiva fskn, make ksiva, sell ksiva, prosecutor's ksiva, buy ksiva candy wrapper, ksiva journalist, ksiva opera, buy ksiva SBU, Black earnings schemes. Earning schemes. Forum about all types of earnings. White money-making schemes, gray money-making schemes, black money-making schemes, fraudulent money-making schemes, criminal money-making schemes, legal money-making schemes. Training, work for cashers, forum, private earning schemes, proprietary earning schemes. Schemes and methods of making money on the Internet, gambling techniques. Production of driver's licenses. Quick acquisition of rights. Drop work. Quick money, easy money, earnings without investments, work from home. Work for everyone. Well-established business. Sale of debit cards. A forum about money-making schemes, money-making schemes, money-making schemes on the Internet, money-making schemes, real money-making schemes, working money-making schemes, gray money-making schemes, black money-making schemes, black money on the Internet, black money-making schemes on the Internet, illegal ways of making money, criminal schemes making money, illegal money making schemes, dangerous making money schemes, white money making schemes, fast money making schemes, free making money schemes, free making money schemes, selling making money schemes, selling making money schemes, making money schemes forum, gray schemes of making money on the Internet, financial schemes of making money, making money schemes money on the Internet, forum about money making schemes,

We offer new FSB IDs http://biznesmaker.pro/index.php?/topic/1518/. Attention. Delivery: To any point in the Russian Federation only by couriers.
Prices for large volumes are negotiated separately. ********************************************** . IDENTIFICATION OF THE FSB OF RUSSIA. The new IDs are blue and have additional levels of security.

The material on the outside has a special texture and is produced at only 1-2 enterprises in Russia.

The paper inside has a raster grid. The thinnest lines of different colors, like those on banknotes, cannot be reproduced using a homemade method. The next security levels are two holograms.

One of them is volumetric, which is also manufactured in only a few factories under the strictest control. With an FSB ID you can often go everywhere without hindrance. And that's why everyone has their own goal.

Someone wants to get it to show it to traffic cops, so that everyone salutes it, and it drives on.
We recommend reading: A qualified lawyer is

And someone wants to get a certificate for some other purpose. Contact me through the forum PM.

tags. buy a license, buy a certificate, where to buy a license, international ID, Ministry of Internal Affairs ID, ID form download, buy a driver's license, FSB XIV, XIV, service ID, Russian Federation ID, FSB ID, combat veteran ID, combat veteran ID, police ID, private security guard's ID, filling out an ID, a journalist's ID, buy a journalist's ID, buy a journalist's ID, get a journalist's ID, a sample journalist's ID, an international journalist's ID, a journalist's ID form, a freelance journalist's ID, make a journalist's ID, the Union of Journalists of Russia, buy a document, buy ksivu, ksivu deputy, make ksivu, ksiv org, red ksiva, ksiv certificates, sell ksiv, sell journalist's ID, sell ksiv journalist, sell certificate, ksiv crusts, where to buy ksiv, you can buy ksiv from us, sale ksiv, ksiv skp, ksiv of a judge, ksiv of an assistant deputy, ksiv org forum, ksiv templates, production of ksiv, journalist's ID officially, ksiva officially, order ksiv, ksiv + to order, buy ksiv + in Moscow, cop ksiv, buy ksiv certificates, buy ksiv of the prosecutor's office, ksiva usb, buy ksiva fskn, make ksiva, sell ksiva, prosecutor's ksiva, buy ksiva candy wrapper, ksiva journalist, ksiva opera, buy ksiva SBU, Black earnings schemes. Earning schemes. Forum about all types of earnings. White money-making schemes, gray money-making schemes, black money-making schemes, fraudulent money-making schemes, criminal money-making schemes, legal money-making schemes.

In the Russian Federation, the initial retirement age limit is fixed at the legislative level: 60 for men and 55 for women. But there is a special cohort of people who reach retirement age earlier than their civilian peers. This category includes employees of the Ministry of Internal Affairs, who upon retirement are issued a pension certificate of the Ministry of Internal Affairs.

Personnel decides everything

When leaving for a well-deserved retirement, an employee of the Ministry of Internal Affairs is required to write a pension application 90 days before dismissal and submit it to personnel. To assign a long-service pension, the HR department attaches the police officer’s application to the documents:

1. Calculation of length of service.
2. Cash certificate.
3. Conclusion of the military medical commission (the military medical examination is completed by the employee upon dismissal at will).
4. Certificate of family composition (when applying for an allowance for dependents).
5. Certificate of non-receipt of a civil pension.
6. Copies of relevant certificates.

From this information, a pension file is formed, which is sent to the appropriate pension authority of the Ministry of Internal Affairs, the Main Internal Affairs Directorate, the Department of Internal Affairs of the constituent entity of the Russian Federation at the place of last service no later than 10 days from the date of exclusion from the lists of the unit.

Based on the pension file provided by the personnel, the pension authority draws up a conclusion on the assignment of a pension. Conclusions are approved by the head of the pension authority of the Ministry of Internal Affairs, the Main Internal Affairs Directorate, and the Internal Affairs Directorate of a constituent entity of the Russian Federation.

Desired ID

Simultaneously with the conclusion on the assignment of a pension, a notification is filled out in 2 copies. The first copy is signed by the relevant officials and sent by mail to the newly minted pensioner. Along with the notification, the former employee receives a Ministry of Internal Affairs pensioner certificate. The second copy is sewn into the pension file stored in the relevant pension authority.

What awaits a newly minted pensioner in civilian life?

The Ministry of Internal Affairs pensioner’s certificate contains some features:

• Relief on payment of property tax on certain types of real estate. The tax is not imposed on an area up to 50 sq.m.
• Transport and land taxes are levied on a general basis, unless otherwise specified in the regulations of local governments.
• Free medical care in medical institutions of the Ministry of Internal Affairs, receipt of medicines and medicines through the medical channels of the structure.
• Close relatives of a pensioner have the right to use medical care.
• Rest in sanatoriums of the Ministry of Internal Affairs. The pensioner pays 25% of the cost of the trip. In addition, the cost of travel in both directions is paid at the expense of the Ministry of Internal Affairs.
• Possibility of receiving a one-time social payment for the purchase of housing, subject to the conditions established by Federal legislation.

A rather impressive list of benefits and guarantees was even wider 10 years ago. Retirees of law enforcement agencies deserve such benefits no less than others. Since at one time they, risking their lives, guarded our peaceful sleep.

I lost my ID, what should I do?

The life of a retired civilian employee is no different from the life of ordinary people. There are different situations in which the Ministry of Internal Affairs pensioner’s certificate is lost or becomes unusable:

• Fire.
• Wash.
• Imprudence.

And many other cases.

A pensioner receiving pension payments from the Pension Fund at the expense of accumulated funds in the relevant state or non-state funds, if he loses his pension certificate, must contact the Pension Fund office at his place of residence. You will need to write an application to the pension department and fill out an application form. After filling out the relevant entries, you will have to wait for a duplicate ID from 14 to 30 days.

With retired employees, the procedure for delivering a duplicate is different. Before receiving a new Ministry of Internal Affairs pensioner certificate, or rather its duplicate, the former employee must contact the personnel department of the Internal Affairs Ministry with an application for the execution of a new document. A duplicate of the certificate will be issued after an official investigation, with the permission of an official of the Ministry of Internal Affairs, the Main Internal Affairs Directorate, or the Department of Internal Affairs of a constituent entity of the Russian Federation.

The ID is not a passport or a military ID.

Many articles on the Russian Internet are littered with textual garbage that confuses people. An example of this is the statement that the Ministry of Internal Affairs pensioner’s ID is an identity document. This is actually not true. The legislation clearly states that identification documents are:

1. Passport of a citizen of the Russian Federation.
2. International passport.
3. An officer's identification card or a military ID card for a military member on active duty.
4. Diplomatic passport.
5. Service passport.

The document itself of a pensioner of the Ministry of Internal Affairs is a kind of analogue of a civil certificate, giving the right to receive a pension. The document can be presented either separately or with an identification document.

Right to old age pension

Upon reaching the age of 60, a retired employee receiving a pension from the Ministry of Internal Affairs can receive an old-age insurance pension. To become the owner of the civil pension payments due, a pensioner from the Ministry of Internal Affairs will have to contact the Pension Fund on a general basis, providing some documents:

• Passport of a citizen of the Russian Federation.
• Work record book or certified copy of the service record.
• SNILS.
• Document on income received for the last 5 years.
• Certificate of family composition.
• Documents confirming awards (if available).

In order not to miss out on part of the pension payments due, retired employees should prepare documents in advance. But it’s even better to seek advice from a Pension Fund specialist.

In any case, former and current employees who faithfully defend citizens are required to receive additional benefits and guarantees.

You may be interested in other articles on this topic:

Raising the retirement age in the Russian Ministry of Internal Affairs How can the wife of a military pensioner transfer to her husband’s pension after his death? What documents are needed to apply for a pension for a citizen of the Russian Federation?

Border cap with a green top, black band and red edging. The cap is equipped with a cockade and a metallized filigree (or varnished) cord. Crown height -7 cm. Made within 3-5 working days.

The summer camouflage suit "Border Guard-2" produced by Prival is made of light mixed fabric and consists of a jacket and trousers. Perfect for lovers of outdoor activities. The suit is comfortable in hot weather, and thanks to its loose fit, it can be worn over clothing as a protective layer. Relaxed jacket with zipper and hood. 2 pockets on the jacket, 2 on the trousers. The trouser waistband has an elastic band and additional fastening with a cord. The bottom of the trousers has an elastic band. Packaged in a compact case. Set composition: jacket / trousers Fabric: 65% polyester, 35% viscose Color: border guard camouflage

FSB\FSO of Russia cap with a blue-black top, cornflower blue band and cornflower blue piping. The cap is equipped with a cockade and a metallized filigree cord. The height of the crown is 8-10 cm. The cap is made within 3-5 working days.

FSB\FSO of Russia cap with a blue-black top, cornflower blue band and cornflower blue piping. The cap is equipped with a cockade and a metallized filigree cord. The height of the crown is 7 cm. The cap is made within 3-5 working days.

A cover for automobile documents made of high-quality nappa leather with gold heat-stamping will serve as reliable protection and a worthy frame for your official ID and other important documents. All models are available in 2 colors: burgundy and black. Please specify when ordering. Cover with metal emblem: The emblem is made of Tompak material (French tombac, from Malay tambaga - copper) - a type of brass. The material has high corrosion resistance, increased ductility and is traditionally used in the manufacture of artistic products, insignia and special accessories. The final processing of the emblem is carried out by highly qualified engravers by hand. The emblem is subjected to artificial aging. The color is applied using hot enamel. The finished product is varnished.

The tie consists of the main part, the knot and the neck. The wide end of the main part ends in an angle, the sides are inclined, the neck of the tie is made of elastic braid and metal fittings. The FSB emblem is embroidered on the tie. The FSB uniform tie is an element of the dress and casual uniform of FSB officers.

Classic model Material: 100% Cotton

Please call for production time. Prepayment of 100% of the cost.

Description The inexpensive gold-plated watch “Vostok 439878” is suitable for those who value classics first and foremost and do not prefer a simple and laconic design, even in accessories, especially in accessories. The wristwatch is round in shape, and along the circumference of the case, hugging the dial, there are numbers showing the minutes, and on the dial itself the hours are measured in Arabic numerals. The hands have a light-accumulating coating, which allows you to know what time it is even in the dark. The leather bracelet of the Vostok 439878 watch will hold it securely on your wrist, and the perpetual calendar measures the days of the month, showing only the date. Characteristics General characteristics Type men's, mechanical Skeleton yes Time display method analog (hands), 12 hours Arabic numerals Energy source Spring mechanism Style Sports Design Waterproof

Cap of the Border Service of the FSB of the Russian Federation with a green top, cornflower blue band and cornflower blue edging. The cap is equipped with a cockade and a metallized filigree cord. Crown height -7 cm. Made within 3-5 working days.

Border cap with a green top, black band and red edging. The cap is equipped with a cockade and a metallized filigree (or varnished) cord. The height of the crown is 8-10 cm. It is made within 3-5 working days.

A document cover made of high-quality nappa leather with gold heat-stamping will serve as reliable protection and a worthy frame for your official ID and other important documents. All models are available in 2 colors: burgundy and black. Please specify when ordering. Cover with metal emblem: The emblem is made of Tompak material (French tombac, from Malay tambaga - copper) - a type of brass. The material has high corrosion resistance, increased ductility and is traditionally used in the manufacture of artistic products, insignia and special accessories. The final processing of the emblem is carried out by highly qualified engravers by hand. The emblem is subjected to artificial aging. The color is applied using hot enamel. The finished product is varnished.

Cap of the Border Service of the FSB of the Russian Federation with a green top, cornflower blue band and cornflower blue edging. The cap is equipped with a cockade and a metallized filigree cord. The height of the crown is 8-10 cm. It is made within 3-5 working days.

The emblem is made on a three-dimensional disk, the color is applied using cold enamel. The disk is fixed on a stamped steel base. The inner side of the base is smooth and suitable for engraving. The keychain is made on a plastic backing, stylized to look like leather.

Material: cotton, mixed fabric Size: 56-62 Color: camouflage "border guard"

Additional discounts do not apply to products with a red price

FSB-FSO general's cap of the Russian Federation with a blue-black top, cornflower blue band and cornflower blue piping. The cap is equipped with a cockade and a metallized filigree cord. The height of the crown is 8-10 cm. The band and visor are hand-embroidered with 5% gold. The cap is produced within 7-15 working days.

Please call for production time. Prepayment of 100% of the cost.

Commander's watch Vostok KGB 921892. Automatic watch. The mechanism has 31 jewels. Power reserve of at least 31 hours. Rotating bezel. Shockproof device of the balance unit. Screw down crown. Strap width 18 mm. East, Russia. Gender: Mens Movement: Mechanical Case: Glass: Mineral Size: 40 mm Water resistance: 30 m Calendar: Number Add. information:

The tie consists of the main part, the knot and the neck. The wide end of the main part ends in an angle, the sides are inclined, the neck of the tie is made of elastic braid and metal fittings. The FSB emblem is embroidered on the tie. The FSB uniform long tie is an element of the dress and casual uniform of FSB officers.

Please call for production time. Prepayment of 100% of the cost.

A document cover made of high-quality nappa leather with gold heat-stamping will serve as reliable protection and a worthy frame for your official ID and other important documents. All models are available in 2 colors: burgundy and black. Please specify when ordering. Cover with metal emblem: The emblem is made of Tompak material (French tombac, from Malay tambaga - copper) - a type of brass. The material has high corrosion resistance, increased ductility and is traditionally used in the manufacture of artistic products, insignia and special accessories. The final processing of the emblem is carried out by highly qualified engravers by hand. The emblem is subjected to artificial aging. The color is applied using hot enamel. The finished product is varnished.

A tie consists of a main part, a knot and a neck. The wide end of the main part ends in an angle, the sides are inclined, the neck of the tie is made of elastic braid and metal fittings. The blue-black tie is an element of the dress and casual uniform of FSB officers.

Model: Vostok 2414/300/819878 Men's wristwatch Collection: Commander Mechanism: Mechanical Case: Steel Glass: Mineral Bracelet: Leather strap Water resistance: 30 m Calendar: Number

Please call for production time. Prepayment of 100% of the cost.

FSB-FSO general's cap of the Russian Federation with a blue-black top, cornflower blue band and cornflower blue piping. The cap is equipped with a cockade and a metallized filigree cord. The height of the crown is 8-10 cm. The band and visor are hand-embroidered with metanite. The cap is produced within 7-15 working days.

Select the desired trims from the catalogue, and in the order form specify the type of trims (pinned or sewn) and the color of the fabric (if sewn). The bar is a rectangular backing covered with an order ribbon. It can be made on a metal or fabric, plastic (flexible) basis. In the case of a fabric backing, the color can be matched to the color of the clothing (gray, olive, blue, black, and so on). Metal-based strips are attached with a pin, which is located on the reverse side, fabric strips are sewn to the uniform. The left side of the chest is designated as the place to wear the order bars. Several order bars are not worn separately, but placed together on a common basis in accordance with the statute of orders and medals. On the general bar, the ribbons are arranged in a certain order in accordance with the statute of orders and medals, recorded in the relevant documents, but the general principle is this: the higher the rank of the award, the higher it is in the list of locations. Each award has a corresponding order bar. In the case where the award contains an order bar, the ribbon used on it is also used to decorate the corresponding order bar. Order bars are collected on an advance payment basis.

Model: Vostok 219553 Men's wristwatch Collection: Commander Mechanism: Mechanical Case: Steel with IP coating Glass: Mineral Bracelet: Leather strap Water resistance: 30 m Calendar: Number

Please call for production time. Prepayment of 100% of the cost.

Please call for production time. Prepayment of 100% of the cost.

Please call for production time. Prepayment of 100% of the cost.

Size: 2×1.8 cm

A smaller copy of the original uniform headdress will successfully emphasize the owner’s involvement in military service or law enforcement and will not take up much space, which is important in a modern metropolis

Size: ∅10 cm A sticker on a car will demonstrate to others that its owner is involved in a certain branch of the military or government structure

A souvenir shirt will add a theme to your party.

A souvenir shirt will add a theme to your party.

A medal is a symbol of victory and this makes it an expensive and memorable gift. By presenting a souvenir medal to a friend, you will help him remember your meeting or joint event years later

Material: Fleece Filling: Synthetic padding Size: 30×30 cm A pillow in a car or on a sofa will demonstrate to others the involvement of its owner in a certain branch of the military or government structure.. well, you can take a nap

A pennant is an element of representative symbolism. A pennant on a desktop or wall will unobtrusively complement the interior of an office. The size of the pennant is 19 by 15 cm.

Please call for production time. Prepayment of 100% of the cost.

A pennant is an element of representative symbolism. A pennant on a desktop or wall will unobtrusively complement the interior of an office. The size of the pennant is 32 by 25 cm.

Please call for production time. Prepayment of 100% of the cost.

Please call for production time. Prepayment of 100% of the cost.

Please call for production time. Prepayment of 100% of the cost.

Please call for production time. Prepayment of 100% of the cost.

Please call for production time. Prepayment of 100% of the cost.

Please call for production time. Prepayment of 100% of the cost.

Select the desired trims from the catalogue, and in the order form specify the type of trims (pinned or sewn) and the color of the fabric (if sewn). The bar is a rectangular backing covered with an order ribbon. It can be made on a metal or fabric, plastic (flexible) basis. In the case of a fabric backing, the color can be matched to the color of the clothing (gray, olive, blue, black, and so on). Metal-based strips are attached with a pin, which is located on the reverse side, fabric strips are sewn to the uniform. The left side of the chest is designated as the place to wear the order bars. Several order bars are not worn separately, but placed together on a common basis in accordance with the statute of orders and medals. On the general bar, the ribbons are arranged in a certain order in accordance with the statute of orders and medals, recorded in the relevant documents, but the general principle is this: the higher the rank of the award, the higher it is in the list of locations. Each award has a corresponding order bar. In the case where the award contains an order bar, the ribbon used on it is also used to decorate the corresponding order bar. Order bars are collected on an advance payment basis.

Please call for production time. Prepayment of 100% of the cost.

Please call for production time. Prepayment of 100% of the cost.

Please call for production time. Prepayment of 100% of the cost.

Please call for production time. Prepayment of 100% of the cost.

Please call for production time. Prepayment of 100% of the cost.

The shoulder straps are removable in white, with a trapezoid-shaped upper edge, with a strap and a through perforation. Width 55 mm. Length -120, 130, 140, 150 mm. On the shoulder straps for persons of senior command there are stars with a diameter of 22 mm, embroidered from 5% gold-plated gimp, in the center of which decorative spangles are placed. Please call for production time. Prepayment of 100% of the cost.

Select the desired trims from the catalogue, and in the order form specify the type of trims (pinned or sewn) and the color of the fabric (if sewn). The bar is a rectangular backing covered with an order ribbon. It can be made on a metal or fabric, plastic (flexible) basis. In the case of a fabric backing, the color can be matched to the color of the clothing (gray, olive, blue, black, and so on). Metal-based strips are attached with a pin, which is located on the reverse side, fabric strips are sewn to the uniform. The left side of the chest is designated as the place to wear the order bars. Several order bars are not worn separately, but placed together on a common basis in accordance with the statute of orders and medals. On the general bar, the ribbons are arranged in a certain order in accordance with the statute of orders and medals, recorded in the relevant documents, but the general principle is this: the higher the rank of the award, the higher it is in the list of locations. Each award has a corresponding order bar. In the case where the award contains an order bar, the ribbon used on it is also used to decorate the corresponding order bar. Order bars are collected on an advance payment basis.

Gender: Mens Movement: Mechanical Case: Glass: Mineral Size: Water Resistance: 30m Calendar: Number Add. information: Terminology: Glass Several types of glass are used in watch production: mineral, sapphire, plastic or mineral/sapphire. Plastic glass is the cheapest option, but it cannot be broken. Mineral glass is almost as easily scratched as plastic. It's easy enough to break. Sapphire crystal is the most scratch resistant, but can also be broken. The combined glass is durable and scratch-resistant.

Select the desired trims from the catalogue, and in the order form specify the type of trims (pinned or sewn) and the color of the fabric (if sewn). The bar is a rectangular backing covered with an order ribbon. It can be made on a metal or fabric, plastic (flexible) basis. In the case of a fabric backing, the color can be matched to the color of the clothing (gray, olive, blue, black, and so on). Metal-based strips are attached with a pin, which is located on the reverse side, fabric strips are sewn to the uniform. The left side of the chest is designated as the place to wear the order bars. Several order bars are not worn separately, but placed together on a common basis in accordance with the statute of orders and medals. On the general bar, the ribbons are arranged in a certain order in accordance with the statute of orders and medals, recorded in the relevant documents, but the general principle is this: the higher the rank of the award, the higher it is in the list of locations. Each award has a corresponding order bar. In the case where the award contains an order bar, the ribbon used on it is also used to decorate the corresponding order bar. Order bars are collected on an advance payment basis.

Please call for production time. Prepayment of 100% of the cost.

A pennant is an element of representative symbolism. A pennant on a desktop or wall will unobtrusively complement the interior of an office. The size of the pennant is 19 by 15 cm.

Select the desired trims from the catalogue, and in the order form specify the type of trims (pinned or sewn) and the color of the fabric (if sewn). The bar is a rectangular backing covered with an order ribbon. It can be made on a metal or fabric, plastic (flexible) basis. In the case of a fabric backing, the color can be matched to the color of the clothing (gray, olive, blue, black, and so on). Metal-based strips are attached with a pin, which is located on the reverse side, fabric strips are sewn to the uniform. The left side of the chest is designated as the place to wear the order bars. Several order bars are not worn separately, but placed together on a common basis in accordance with the statute of orders and medals. On the general bar, the ribbons are arranged in a certain order in accordance with the statute of orders and medals, recorded in the relevant documents, but the general principle is this: the higher the rank of the award, the higher it is in the list of locations. Each award has a corresponding order bar. In the case where the award contains an order bar, the ribbon used on it is also used to decorate the corresponding order bar. Order bars are collected on an advance payment basis.

Select the desired trims from the catalogue, and in the order form specify the type of trims (pinned or sewn) and the color of the fabric (if sewn). The bar is a rectangular backing covered with an order ribbon. It can be made on a metal or fabric, plastic (flexible) basis. In the case of a fabric backing, the color can be matched to the color of the clothing (gray, olive, blue, black, and so on). Metal-based strips are attached with a pin, which is located on the reverse side, fabric strips are sewn to the uniform. The left side of the chest is designated as the place to wear the order bars. Several order bars are not worn separately, but placed together on a common basis in accordance with the statute of orders and medals. On the general bar, the ribbons are arranged in a certain order in accordance with the statute of orders and medals, recorded in the relevant documents, but the general principle is this: the higher the rank of the award, the higher it is in the list of locations. Each award has a corresponding order bar. In the case where the award contains an order bar, the ribbon used on it is also used to decorate the corresponding order bar. Order bars are collected on an advance payment basis.

Select the desired trims from the catalogue, and in the order form specify the type of trims (pinned or sewn) and the color of the fabric (if sewn). The bar is a rectangular backing covered with an order ribbon. It can be made on a metal or fabric, plastic (flexible) basis. In the case of a fabric backing, the color can be matched to the color of the clothing (gray, olive, blue, black, and so on). Metal-based strips are attached with a pin, which is located on the reverse side, fabric strips are sewn to the uniform. The left side of the chest is designated as the place to wear the order bars. Several order bars are not worn separately, but placed together on a common basis in accordance with the statute of orders and medals. On the general bar, the ribbons are arranged in a certain order in accordance with the statute of orders and medals, recorded in the relevant documents, but the general principle is this: the higher the rank of the award, the higher it is in the list of locations. Each award has a corresponding order bar. In the case where the award contains an order bar, the ribbon used on it is also used to decorate the corresponding order bar. Order bars are collected on an advance payment basis.

Select the desired trims from the catalogue, and in the order form specify the type of trims (pinned or sewn) and the color of the fabric (if sewn). The bar is a rectangular backing covered with an order ribbon. It can be made on a metal or fabric, plastic (flexible) basis. In the case of a fabric backing, the color can be matched to the color of the clothing (gray, olive, blue, black, and so on). Metal-based strips are attached with a pin, which is located on the reverse side, fabric strips are sewn to the uniform. The left side of the chest is designated as the place to wear the order bars. Several order bars are not worn separately, but placed together on a common basis in accordance with the statute of orders and medals. On the general bar, the ribbons are arranged in a certain order in accordance with the statute of orders and medals, recorded in the relevant documents, but the general principle is this: the higher the rank of the award, the higher it is in the list of locations. Each award has a corresponding order bar. In the case where the award contains an order bar, the ribbon used on it is also used to decorate the corresponding order bar. Order bars are collected on an advance payment basis.

Select the desired trims from the catalogue, and in the order form specify the type of trims (pinned or sewn) and the color of the fabric (if sewn). The bar is a rectangular backing covered with an order ribbon. It can be made on a metal or fabric, plastic (flexible) basis. In the case of a fabric backing, the color can be matched to the color of the clothing (gray, olive, blue, black, and so on). Metal-based strips are attached with a pin, which is located on the reverse side, fabric strips are sewn to the uniform. The left side of the chest is designated as the place to wear the order bars. Several order bars are not worn separately, but placed together on a common basis in accordance with the statute of orders and medals. On the general bar, the ribbons are arranged in a certain order in accordance with the statute of orders and medals, recorded in the relevant documents, but the general principle is this: the higher the rank of the award, the higher it is in the list of locations. Each award has a corresponding order bar. In the case where the award contains an order bar, the ribbon used on it is also used to decorate the corresponding order bar. Order bars are collected on an advance payment basis.

Select the desired trims from the catalogue, and in the order form specify the type of trims (pinned or sewn) and the color of the fabric (if sewn). The bar is a rectangular backing covered with an order ribbon. It can be made on a metal or fabric, plastic (flexible) basis. In the case of a fabric backing, the color can be matched to the color of the clothing (gray, olive, blue, black, and so on). Metal-based strips are attached with a pin, which is located on the reverse side, fabric strips are sewn to the uniform. The left side of the chest is designated as the place to wear the order bars. Several order bars are not worn separately, but placed together on a common basis in accordance with the statute of orders and medals. On the general bar, the ribbons are arranged in a certain order in accordance with the statute of orders and medals, recorded in the relevant documents, but the general principle is this: the higher the rank of the award, the higher it is in the list of locations. Each award has a corresponding order bar. In the case where the award contains an order bar, the ribbon used on it is also used to decorate the corresponding order bar. Order bars are collected on an advance payment basis.

Please call for production time. Prepayment of 100% of the cost.

Select the desired trims from the catalogue, and in the order form specify the type of trims (pinned or sewn) and the color of the fabric (if sewn). The bar is a rectangular backing covered with an order ribbon. It can be made on a metal or fabric, plastic (flexible) basis. In the case of a fabric backing, the color can be matched to the color of the clothing (gray, olive, blue, black, and so on). Metal-based strips are attached with a pin, which is located on the reverse side, fabric strips are sewn to the uniform. The left side of the chest is designated as the place to wear the order bars. Several order bars are not worn separately, but placed together on a common basis in accordance with the statute of orders and medals. On the general bar, the ribbons are arranged in a certain order in accordance with the statute of orders and medals, recorded in the relevant documents, but the general principle is this: the higher the rank of the award, the higher it is in the list of locations. Each award has a corresponding order bar. In the case where the award contains an order bar, the ribbon used on it is also used to decorate the corresponding order bar. Order bars are collected on an advance payment basis.

Select the desired trims from the catalogue, and in the order form specify the type of trims (pinned or sewn) and the color of the fabric (if sewn). The bar is a rectangular backing covered with an order ribbon. It can be made on a metal or fabric, plastic (flexible) basis. In the case of a fabric backing, the color can be matched to the color of the clothing (gray, olive, blue, black, and so on). Metal-based strips are attached with a pin, which is located on the reverse side, fabric strips are sewn to the uniform. The left side of the chest is designated as the place to wear the order bars. Several order bars are not worn separately, but placed together on a common basis in accordance with the statute of orders and medals. On the general bar, the ribbons are arranged in a certain order in accordance with the statute of orders and medals, recorded in the relevant documents, but the general principle is this: the higher the rank of the award, the higher it is in the list of locations. Each award has a corresponding order bar. In the case where the award contains an order bar, the ribbon used on it is also used to decorate the corresponding order bar. Order bars are collected on an advance payment basis.

Select the desired trims from the catalogue, and in the order form specify the type of trims (pinned or sewn) and the color of the fabric (if sewn). The bar is a rectangular backing covered with an order ribbon. It can be made on a metal or fabric, plastic (flexible) basis. In the case of a fabric backing, the color can be matched to the color of the clothing (gray, olive, blue, black, and so on). Metal-based strips are attached with a pin, which is located on the reverse side, fabric strips are sewn to the uniform. The left side of the chest is designated as the place to wear the order bars. Several order bars are not worn separately, but placed together on a common basis in accordance with the statute of orders and medals. On the general bar, the ribbons are arranged in a certain order in accordance with the statute of orders and medals, recorded in the relevant documents, but the general principle is this: the higher the rank of the award, the higher it is in the list of locations. Each award has a corresponding order bar. In the case where the award contains an order bar, the ribbon used on it is also used to decorate the corresponding order bar. Order bars are collected on an advance payment basis.

Select the desired trims from the catalogue, and in the order form specify the type of trims (pinned or sewn) and the color of the fabric (if sewn). The bar is a rectangular backing covered with an order ribbon. It can be made on a metal or fabric, plastic (flexible) basis. In the case of a fabric backing, the color can be matched to the color of the clothing (gray, olive, blue, black, and so on). Metal-based strips are attached with a pin, which is located on the reverse side, fabric strips are sewn to the uniform. The left side of the chest is designated as the place to wear the order bars. Several order bars are not worn separately, but placed together on a common basis in accordance with the statute of orders and medals. On the general bar, the ribbons are arranged in a certain order in accordance with the statute of orders and medals, recorded in the relevant documents, but the general principle is this: the higher the rank of the award, the higher it is in the list of locations. Each award has a corresponding order bar. In the case where the award contains an order bar, the ribbon used on it is also used to decorate the corresponding order bar. Order bars are collected on an advance payment basis.

Select the desired trims from the catalogue, and in the order form specify the type of trims (pinned or sewn) and the color of the fabric (if sewn). The bar is a rectangular backing covered with an order ribbon. It can be made on a metal or fabric, plastic (flexible) basis. In the case of a fabric backing, the color can be matched to the color of the clothing (gray, olive, blue, black, and so on). Metal-based strips are attached with a pin, which is located on the reverse side, fabric strips are sewn to the uniform. The left side of the chest is designated as the place to wear the order bars. Several order bars are not worn separately, but placed together on a common basis in accordance with the statute of orders and medals. On the general bar, the ribbons are arranged in a certain order in accordance with the statute of orders and medals, recorded in the relevant documents, but the general principle is this: the higher the rank of the award, the higher it is in the list of locations. Each award has a corresponding order bar. In the case where the award contains an order bar, the ribbon used on it is also used to decorate the corresponding order bar. Order bars are collected on an advance payment basis.

Select the desired trims from the catalogue, and in the order form specify the type of trims (pinned or sewn) and the color of the fabric (if sewn). The bar is a rectangular backing covered with an order ribbon. It can be made on a metal or fabric, plastic (flexible) basis. In the case of a fabric backing, the color can be matched to the color of the clothing (gray, olive, blue, black, and so on). Metal-based strips are attached with a pin, which is located on the reverse side, fabric strips are sewn to the uniform. The left side of the chest is designated as the place to wear the order bars. Several order bars are not worn separately, but placed together on a common basis in accordance with the statute of orders and medals. On the general bar, the ribbons are arranged in a certain order in accordance with the statute of orders and medals, recorded in the relevant documents, but the general principle is this: the higher the rank of the award, the higher it is in the list of locations. Each award has a corresponding order bar. In the case where the award contains an order bar, the ribbon used on it is also used to decorate the corresponding order bar. Order bars are collected on an advance payment basis.

Select the desired trims from the catalogue, and in the order form specify the type of trims (pinned or sewn) and the color of the fabric (if sewn). The bar is a rectangular backing covered with an order ribbon. It can be made on a metal or fabric, plastic (flexible) basis. In the case of a fabric backing, the color can be matched to the color of the clothing (gray, olive, blue, black, and so on). Metal-based strips are attached with a pin, which is located on the reverse side, fabric strips are sewn to the uniform. The left side of the chest is designated as the place to wear the order bars. Several order bars are not worn separately, but placed together on a common basis in accordance with the statute of orders and medals. On the general bar, the ribbons are arranged in a certain order in accordance with the statute of orders and medals, recorded in the relevant documents, but the general principle is this: the higher the rank of the award, the higher it is in the list of locations. Each award has a corresponding order bar. In the case where the award contains an order bar, the ribbon used on it is also used to decorate the corresponding order bar. Order bars are collected on an advance payment basis.

Select the desired trims from the catalogue, and in the order form specify the type of trims (pinned or sewn) and the color of the fabric (if sewn). The bar is a rectangular backing covered with an order ribbon. It can be made on a metal or fabric, plastic (flexible) basis. In the case of a fabric backing, the color can be matched to the color of the clothing (gray, olive, blue, black, and so on). Metal-based strips are attached with a pin, which is located on the reverse side, fabric strips are sewn to the uniform. The left side of the chest is designated as the place to wear the order bars. Several order bars are not worn separately, but placed together on a common basis in accordance with the statute of orders and medals. On the general bar, the ribbons are arranged in a certain order in accordance with the statute of orders and medals, recorded in the relevant documents, but the general principle is this: the higher the rank of the award, the higher it is in the list of locations. Each award has a corresponding order bar. In the case where the award contains an order bar, the ribbon used on it is also used to decorate the corresponding order bar. Order bars are collected on an advance payment basis.

Select the desired trims from the catalogue, and in the order form specify the type of trims (pinned or sewn) and the color of the fabric (if sewn). The bar is a rectangular backing covered with an order ribbon. It can be made on a metal or fabric, plastic (flexible) basis. In the case of a fabric backing, the color can be matched to the color of the clothing (gray, olive, blue, black, and so on). Metal-based strips are attached with a pin, which is located on the reverse side, fabric strips are sewn to the uniform. The left side of the chest is designated as the place to wear the order bars. Several order bars are not worn separately, but placed together on a common basis in accordance with the statute of orders and medals. On the general bar, the ribbons are arranged in a certain order in accordance with the statute of orders and medals, recorded in the relevant documents, but the general principle is this: the higher the rank of the award, the higher it is in the list of locations. Each award has a corresponding order bar. In the case where the award contains an order bar, the ribbon used on it is also used to decorate the corresponding order bar. Order bars are collected on an advance payment basis.