Keep the ps in working condition. Organization of safe operation of lifting structures as part of a hazardous production facility

"I CONFIRM":

___________________________

__________________________

__________________________

__________________________

JOB DESCRIPTION

person responsible for carrying out production control over compliance with requirements industrial safety at hazardous production facilities by officials

General provisions

This instruction establishes requirements aimed at ensuring the safe operation of hazardous production facilities, as well as preventing accidents and ensuring the organization’s readiness to localize and eliminate the consequences of accidents at hazardous production facilities through the implementation of a set of organizational and technical measures.

The person responsible for carrying out production control carries out his work on the basis of these instructions.

The person responsible for the implementation of production control is appointed and dismissed by order of the head of the enterprise.

Qualification requirements and required level knowledge

Functions of the person responsible for implementation production control, are assigned to one of the deputy heads of the enterprise.

The person responsible for the implementation of production control undergoes certification (testing knowledge of industrial safety requirements and other regulatory legal acts and normative and technical documents within the competence of those being certified) to the extent appropriate job responsibilities and established competence. The certification procedure complies with the “Regulations on the procedure for training and certification of organizations operating in the field of industrial safety of hazardous production facilities controlled by the State Mining and Technical Supervision Authority of Russia.” Certification of the person responsible for carrying out production control is carried out at least once every three years. An extraordinary knowledge test is carried out: when new or revised regulatory legal acts and regulatory and technical documents in the field of industrial safety are put into effect; when introducing new types technical devices and new technologies at hazardous production facilities; when repeated violations of industrial safety requirements are detected; after accidents, accidents and incidents have occurred.

Responsibilities

The person responsible for the implementation of production control is obliged to: Ensure that employees of hazardous production facilities comply with industrial safety requirements.

Develop a work plan for the implementation of production control in the divisions of the operating organization.

Carry out comprehensive and targeted checks industrial safety conditions, identify hazardous factors at workplaces.

3.4. Annually develop an action plan to ensure industrial safety based on the results of checking the state of industrial safety and certification of workplaces.

3.5. Organize the development of action plans to localize accidents and incidents and eliminate their consequences.

3.6. Organize work to prepare for the examination of industrial safety of hazardous production facilities.

3.7. Participate in the technical investigation of the causes of accidents, incidents and accidents.

3.8. Conduct an analysis of the causes of accidents and incidents at hazardous production facilities and store documentation for their recording.

3.9. Organize training and certification of workers in the field of industrial safety.

3.10. Participate in the implementation of new technologies and new equipment.

3.11. Bring to the attention of workers at hazardous production facilities information about changes in industrial safety requirements established by regulatory legal acts, and provide workers with the specified documents.

3.12. Make proposals to the head of the organization:

On carrying out measures to ensure industrial safety;

On eliminating violations of industrial safety requirements;

On the suspension of work carried out at hazardous production facilities

facility in violation of industrial safety requirements, creating a threat to life and

health of workers, or work that may lead to an accident or damage

the natural environment;

On the removal from work at a hazardous production facility of persons who do not have the appropriate qualifications and who have not undergone timely training and certification in industrial safety;

On bringing to justice persons who violated industrial safety requirements;

3.13. Carry out other activities to ensure industrial safety requirements.

3.14. Submit information on the organization of production control to the Kaliningrad department of the North-Western District of the Gosgortekhnadzor of Russia. Information on plans for the current year and based on the results of the previous calendar year is presented within the deadlines established by the relevant federal executive authorities (once a quarter, no later than the 10th day of the month following the reporting one and at the end of the reporting year no later than December 1). The data contained in the information is determined by the “Regulations on the organization and conduct of production control over compliance with industrial safety requirements at hazardous production facilities by officials.”

The person responsible for production control ensures control over:

3.15. Compliance with the conditions of licenses for activities in the field of industrial safety.

3.16. Construction or reconstruction of hazardous production facilities, as well as repair of technical devices used at hazardous production facilities, in terms of compliance with industrial safety requirements.

3.17. Eliminating the causes of accidents, incidents and accidents.

3.18. Timely carrying out by the relevant services of the necessary tests and technical examinations of technical devices used at hazardous production facilities, repairs and verification control means measurements.

3.19. Availability of certificates of compliance with industrial safety requirements for the technical devices used.

3.20. Compliance with the requirements of the Federal Mining and Industrial Supervision of Russia and its territorial bodies, as well as the relevant federal executive authorities on industrial safety issues.

Rights

The person responsible for production control has the right:

4.1. Provide free access to hazardous production facilities at any time of the day.

4.2. Gets acquainted with the documents necessary to assess the state of industrial safety.

4.3. Participate in the activities of the commission to investigate the causes of accidents, incidents and accidents at a hazardous production facility.

4.4. Participate in the development and revision of industrial safety declarations.

4.5. Make proposals to the head of the organization to encourage employees who took part in the development and implementation of measures to improve industrial safety.

Responsibility

The person responsible for the implementation of production control is responsible for:

5.1. In accordance with Article 17 of the Federal Law “On Industrial Safety of Hazardous Production Facilities” for violation of the said Federal Law, other federal laws, other regulatory legal acts and regulatory and technical documents in the field of industrial safety in accordance with the law Russian Federation.

Chief Engineer ____________________

B.9.31. Operation of hazardous production facilities that use lifting structures designed for lifting and moving

Cargoes

Topic 1. General requirements for PS

Question 1. Which of the following HIFs are not subject to the requirements of the FNP PS?

At the hazardous production facility where cable cars are operated

Question 2. Which of the following HIFs are subject to the requirements of the FNP PS?

At hazardous production facilities where electric freight trolleys are operated, moving along overhead rail tracks together with a control cabin

Question 3. What document confirms the compliance of the software with the requirements of technical regulations?

Certificate or declaration of conformity

Question 4. Which mobile systems do not require confirmation of compliance with requirements? Technical regulations"On the safety of wheeled Vehicle»?

Pipe laying cranes

Question 5. Ch What is meant by the term “Lifting Structure Incident”?

Failure of a substation used at a hazardous production facility, rendering the substation inoperative, preventing its continued operation without repairs

\ Question 6. Ch what is meant by the term “Operation and I"?

Operation - stage life cycle The PS on which its quality is implemented, maintained and restored. Operation of the substation includes intended use (work), transportation, installation, storage, maintenance and repair

Question 7. What is meant by technical examination of a substation?

A set of administrative and technical measures aimed at confirming the operability and industrial safety of the substation in operation

Question with 8. What What is meant by the term “Crane operation cycle”?

The set of operations associated with the transportation of cargo by a crane during operation, from the moment when the crane is ready to lift a load until the moment it is ready to lift the next load

Question 9. Which of the listed substations are not subject to registration with Rostechnadzor authorities?

Pipe laying cranes

Question 10. Which of the listed substations are subject to registration with Rostechnadzor authorities? Lifts and towers designed to move people

Question 11. Does an organization operating a hazardous production facility with a substation have the right to attract specialists? third party organizations as: a specialist responsible for carrying out production control during the operation of the substation; a specialist responsible for maintaining the PS in working condition; specialist responsible for safe production works using PS?

Doesn't have the right

Question 12. Who in mandatory employees of hazardous production facilities directly involved in the operation of the substation must inform about the threat of emergency situation?

Your immediate supervisor

Topic 2. Repair, reconstruction or modernization of substation hazardous production facilities

Question 1. What should be done for substations that have reached the end of their service life to extend their service life?

Overhaul or complete repairs, as well as industrial safety examination

Question 2. Which organization? Federal regulations and the rules assign responsibility for the operation of a substation that is not equipped with limiters, indicators and recorders necessary to ensure the industrial safety of the technological process in which the substation is used?

To the organization operating the substation

Question 3. Representatives of which organizations sign the protocol in case of loss of long-term storage information during the repair of the substation operating parameters recorder?

A specialized organization that carries out repairs of the substation and an organization that operates the substation.

Topic 3. Operation of PS HPF

Question 1. Which organization has the right to make changes to the developed PPR (project for the production of substation works) to carry out construction and installation work?

Only the organization that develops the PPR

Question 2. How much higher should crane booms be when turning or moving objects and equipment encountered along the way?

Not less than 500 mm

Question 3: What are the requirements for installing floor- or radio-controlled cranes?

Clear passage must be provided for the worker operating the crane

Question 4. In what cases is it possible to install stationary electric hoists or winches above production floors to lift loads through a hatch in the floor?

Installation not allowed

Question 5. At what position of the crane on an overhead rail track should the compliance of the distance from the protruding parts of the ends of the crane to the columns, building walls and railings of passage galleries be checked?

With a symmetrical arrangement of the crane wheels relative to the rail

Question 6. What is the distance established from the top point of the crane moving along an overhead rail track to the ceiling of the building or the building structure above the crane?

Not less than 100 mm

Question 7. What is the distance established from the bottom point of the crane (not counting the load-handling member) moving along an overhead rail track to the floor of the workshop or areas where people may be present while the crane is operating (with the exception of areas intended for repairing the crane)?

Not less than 2000 mm

Question 8. What is the distance established from the lower protruding parts of the crane (not counting the load-handling element) moving along an overhead rail track to the equipment located in the operating area?

Not less than 400 mm

Question 9. What is the horizontal distance between the protruding parts of the crane moving along a ground crane track and stacks of cargo located at a height of up to 2000 mm from the level of the working platforms?

Not less than 700 mm

Question 10. What is the vertical distance from the counterweight console? tower crane to areas where people may be?

Not less than 2000 mm

Question 11. At what distance from building elements, equipment and stacks of cargo should electric hoists and monorail trolleys with automatic or semi-automatic control be installed if these vehicles are not accompanied by an operator during movement?

In such a way that during movement there is no possibility of the load touching the elements of the building, equipment and stacks of goods

Question 12. With whom should the installation of cranes moving along a rail track be coordinated? security zone air lines power transmission?

With line owner

Question 13. In what case is it permitted to install a jib crane or loader crane only on two or three outriggers?

Not allowed, PS is installed on all outriggers

Question 14. Who determines the procedure for operating a crane near a power line made with a flexible insulated cable?

Line owner

Question 15. What distance must be maintained between the crane boom and contact wires when operating jib-type cranes under the switched-on contact wires of urban transport in the presence of a limiter (stop)?

Not less than 1.0 m

Question 16. In what cases is it allowed to unload (load) bricks on pallets without fencing?

Only when unloading (loading) vehicles onto the ground (and from the ground)

Question 17. What loads are called “loads of complex configuration” when performing a tilting operation?

Loads with a shifted center of gravity

Question 18. To what height should the load be first raised before moving (and then stopping) to check the correctness of the sling and the reliability of the PS brake?

No more than 200-" 00 mm

Question 19. 3 In what cases is the movement of goods in an unstable position allowed?

Prohibited

Question 20. In what cases is it permitted to drag a load along the ground, floor or rails using PS hooks?

Only in cases of using guide blocks that provide vertical position cargo ropes

Question 21. In what cases is a jib crane not allowed to lift a load directly from its installation site (from the ground, platform, stack)?

If the load is lifted only by the boom telescoping mechanism

Question 22, In what cases is it permissible to turn a lifted load by hand?

In cases where the load is lifted to a height of no more than 1000 mm

Question 23. What is the requirement for safe operation PS is indicated incorrectly?

Measures for the safe descent of crane operators must be indicated in the flow chart

Question 24. In what cases does the operating organization develop measures for the safe descent of crane operators from the cab during forced stop overhead crane not at the landing pad?

If the workshop (flight) is not equipped with walk-through galleries along the rail track

Question 25. What industrial safety measures should be observed when performing painting works carried out in the building from the transition platforms of the overhead crane?

Warning falls from a crane caused by a sudden start of movement of the crane or

his cargo trolley, being run over by a nearby crane, and also being hit electric shock,

falling when entering rail tracks or crane beams

Question 26. What industrial safety measures should be taken for substations installed on outdoors and located in inoperative?

The substations must be de-energized and measures must be taken to prevent them from being blown away by the wind

Question 27. What equipment should the operating organization provide to its slingers in order to ensure industrial safety? technological processes slings?

Tested and marked lifting devices and containers corresponding to the weight and nature of the goods being moved

Question 28. In what cases, during the construction of buildings and structures, must the crane driver (operator) be given commands via two-way radio or telephone communication?

When constructing buildings or structures with a height of more than 36 m

Question 29. In what places should stationary trestles or hanging platforms for slingers be installed?

In places of constant loading and unloading of vehicles and gondola cars

Question 30. In what cases is it permitted to load packages of rolled metal or pipes using the metal twists of the packages?

Prohibited in all cases

Question 31. How should the load be distributed on each of the PSs if lifting and moving the load is carried out by two PSs?

The load on each substation must not exceed the load-carrying capacity of the substation

Question 32. Is it allowed to move cargo using PS over floors under which industrial, residential or office premises, where might people be?

Not allowed

Question 33. In what cases should areas of operating substations be fenced and marked? warning signs, while people are not allowed to be in the work area?

During operation of substations equipped with a controlled gripper, grab or magnet

Question 34. Who issues permission to put a jib crane into operation?

A specialist responsible for carrying out production control during the operation of a substation, or a specialist responsible for safe execution works using PS, depending on specific cases

Question 35. Where is the decision to commission lifting devices and containers written down?

In a special accounting and inspection journal

Question 36. What serves as the basis for the decision to put cranes into operation bridge type and portal frame, after installation using welding?

Commission decision i

Question 37. Who is the chairman of the commission created to decide on the commissioning of the substation after the installation of overhead cranes and a portal crane using welding? *

Authorised representative operating organization

Question 38. Who is appointed as the chairman of the commission created to decide on putting into operation when changing the operating organization for a substation that has completed its service life?

Authorized representative of the operating organization

Question 39. How many days before the start of the commission’s work must the operating organization notify in writing the organizations whose representatives are included in the commission about the first stage of the commission’s work on putting the substation into operation?

No less than 10 days

Question 40. When are production instructions issued to personnel servicing the substation?

Before permission to work, against signature

Question 41. Who should appoint a signalman in cases where the area served by the substation is not completely visible from the control cabin, and in the absence of radio or telephone communication between the crane operator and the slinger?

Specialist responsible for the safe performance of work using PS

Question 42. What should be done in the case when the area served by the substation is not completely visible from the control cabin and in the absence of radio or telephone communication between the operator (crane operator) and the slinger?

A signalman must be appointed from among the slingers

Question 43. Which of the specialists and personnel must be familiarized with the PPR before the start of PS work?

Specialists responsible for the safe performance of work using PS, crane operators (operators) and slingers

Question 44. Who should approve the PPR using PS, TC for loading unloading work?

Head of the operating organization performing work using the PS

Question 45. Which parameter from the PS passport (in the form of an extract) must be included in the section of the PPR and Labor Code related to the organization of safe work?

Wind strength at which its operation is not allowed

Question 46. In what cases is it permitted to supply cargo into openings (hatches) of floors?

If this is provided for by a specially developed PPR %

Question 47. What document determines the scope of work, the procedure and frequency of technical inspections of the substation?

The manual (instructions) for operating the substation, and in the absence of instructions in it, FNP requirements PS

Question 48. Which of the listed PSs is allowed to conduct a full technical examination once every 5 years?

substations that serve electrical and pumping stations, compressor units

Question 49. What is the frequency of partial technical examination installed for the PS during its entire service life?

At least once every 12 months

Question 50. What frequency of full technical examination is established for the PS during its entire service life?

At least once every 3 years, with the exception of rarely used PS Question 51. What should be done after overhaul PS?

Extraordinary full technical examination

Question 52. In which of the listed cases, during an extraordinary full technical examination of a substation, only static tests are carried out?

After replacing the load-handling element

Question 53. Who should conduct a technical examination of the PS?

Specialist responsible for carrying out production control during the operation of the substation with the participation of a specialist responsible for maintaining the substation in working condition

\J- Question 54. Who establishes the need and frequency of non-destructive testing of suspension parts of plate hooks of cranes transporting molten metal and liquid slag?

Operating organization, unless otherwise specified in the operating manual of the substation

Question 55. In what cases, if there are two lifting mechanisms on a substation, should their static tests be carried out simultaneously?

If this is provided for in the PS passport

■ "Question 56. What is the duration of static testing of cable cranes?

Question 57. When \ boom type is considered to have passed static tests?

If within 10. the lifted load will not fall to the ground, and no cracks, residual deformations or other damage to metal structures and mechanisms were detected

Question 58. Kaki: dynamic tests of self-propelled jib cranes should be carried out with a load! ■

The mass of which is on! 0% exceeds its rated load capacity

Question 59. What tests are the lifting mechanisms of the substation subject to, if their separate operation is provided?

Each mechanism must be tested under static and dynamic loads

Question 60. Which load-handling device is tested during repeated periodic technical examinations of PSs that have several load-handling devices?

With the one established at the time of the event

Question 61. What are the requirements for steel ropes installed on substations when replacing previously installed ones?

Steel ropes must comply with the grade, diameter and breaking force specified in the PS passport and have a certificate from the manufacturer

Question 62. What requirements must steel chains installed on substations meet?

Steel chains must comply with the grade and breaking force specified in the PS passport, and have a certificate from the chain manufacturer.

Question 63. What requirements must the design and dimensions of stairs, landing platforms and galleries of elevated rail tracks meet?

Requirements of the design and operational documentation on the rail track

Question 64. In what cases should plan-height survey data be attached to the acceptance certificate of a rail track, which determines its readiness for operation?

In all of the above cases

Question 65. Is it allowed to intersect the tracks of gantry, tower and portal cranes with the rail tracks of factory vehicles?

Allowed only after the development of measures to prevent collisions between operating cranes and rolling stock and agreement with the organization in charge of organizing traffic on railway tracks

Question 66. In what cases should the rail tracks of substations moving on rails be repaired?

If necessary

Question 67. Who carries out the shift inspection of the substation track?

Crane operator (operator) to the extent provided for in the production instructions

Question 68. When is it carried out? scheduled inspection condition of the substation rail tracks by a specialist responsible for maintaining the substation in working condition?

After every 24 work shifts

Question 69. Which organization carries out periodic comprehensive examination PS rail tracks?

Specialized organization

Question 70. How often should a comprehensive inspection of the substation rail tracks be carried out?

At least once every three years

Question 71. What number of branches for slings with more than three branches is taken into account when calculating their load capacity?

No more than three branches

Question 72. How often during operation should traverses, pincers, grips and containers be inspected?

Every month

Question 73. What document is used to document the results of tests of load-handling devices under static load application?

Act or protocol

Question 74. In which of the listed cases does the operating organization have the right to allow the substation to operate?

For a rarely used PS, more than three years have passed since the previous technical examination

Question 75. What rail head wear is a condition for rejecting the crane track of support cranes?

15% or more of the corresponding size of an unworn profile

Question 76. Which of the following is a condition for rejecting a crane rope that has been subjected to surface wear or corrosion?

Reduction in rope diameter by 7% or more compared to the nominal diameter, even in the absence of visible wire breaks

Question 77. What loading mode for PS mechanisms does not exist?

L2- moderate severity

Question 78. At what elongation of a chain link from the original size chain sling subject to rejection?

More than 3.0% of original size

Added to the site:

1. General Provisions

1.1. This instruction has been developed in accordance with the requirements of "" approved. by order Federal service on environmental, technological and nuclear supervision dated November 12, 2013 No. 533.

1.2. Specialist responsible for production control during operation lifting structures(hereinafter referred to as the responsible specialist) is appointed by order general director, after passing certification in the field of industrial safety and receiving a job description.

1.4. Re-certification of the responsible specialist is carried out at least once every 5 years.

1.5. The responsible specialist reports to the head of the labor protection, industrial and environmental safety, and in his absence - to the General Director.

1.7. The responsible specialist carries out production control over the safe operation of lifting structures, removable load-handling devices, containers and rail tracks.

1.8. During vacation, business trip, illness and in other cases of absence of the responsible specialist, the performance of his duties is assigned by order to another employee with the appropriate qualifications.

1.9. The responsible specialist must know:

1.9.1. Safety rules for hazardous production facilities that use lifting structures;

1.9.2. Rules for the construction of electrical installations (PUE) section “Electrical equipment of cranes”;

1.9.3. Rules on labor protection during the operation of electrical installations;

1.9.4. Job description;

1.9.5. Requirements of instructions for the operation of lifting structures of manufacturing enterprises;

1.9.6. , responsible for maintaining lifting structures in working condition and specialists responsible for safe production using lifting structures.

Manufacturing instructions for personnel involved in the repair and maintenance of lifting structures;

1.9.8. Guidelines by examination lifting machines, spent regulatory period services;

1.9.9. Information letters Rostechnadzor on the prevention of accidents during the operation of lifting structures.

2. Responsibilities

2.1. The responsible specialist must:

2.1.1. Carry out production control over the technical condition and safe operation of lifting structures, removable load-handling devices, containers, rail tracks and take measures to prevent violations of safety rules;

2.1.2. Conduct technical inspections of lifting structures not registered with Rostekhnadzor, as well as keep records of them;

2.1.3. Monitor the implementation of issued state regulations. inspectors of Rostechnadzor regulations;

2.1.4. Monitor compliance with repair schedules, technical services And periodic inspections lifting structures, rail tracks, removable load-handling devices and containers;

2.1.5. Participate in commissions for certification of specialists in the field of industrial safety and testing the knowledge of maintenance and repair personnel;

2.1.6. Check compliance established by the rules safety procedures for admitting personnel to servicing lifting structures;

2.1.7. Monitor the availability and implementation of instructions service personnel and responsible specialists;

2.1.8. Check compliance with the requirements of safety rules, work plans and technological maps when carrying out work using lifting structures;

2.1.10. Check availability of work on site technical documentation on the operation of lifting structures;

2.1.11. Monitor compliance with the established procedure for putting lifting structures into operation;

2.1.12. Check compliance with the procedure established by the owner for the allocation and direction of mobile lifting structures to objects;

2.1.13. Bring to the attention of service personnel, managers and specialists related to the operation of lifting structures information on the state of accidents and injuries, with an analysis of violations during the operation of lifting structures;

2.1.14. Be present during inspections of the technical safety of lifting structures by representatives of Rostechnadzor authorities.

2.2. The specialist responsible for carrying out production control during the operation of lifting structures should not allow them to operate if, during the inspection, he established that:

2.2.1. Repair and maintenance of lifting structures is carried out by personnel who have not passed the knowledge test;

2.2.2. The specialists responsible for the safe performance of work using lifting structures and the specialists responsible for the operational condition of lifting structures have not been appointed;

2.2.3. The period for technical examination of lifting structures has expired;

2.2.4. The instructions issued by them or Rostechnadzor authorities to ensure the safe operation of lifting machines have not been fulfilled;

2.2.5. Identified on lifting structures technical issues: cracks or deformations of metal structures, loosening of fastenings in connections of metal structures, malfunction of instruments and safety devices, malfunction of the control system, unacceptable wear of hooks, ropes, chains, malfunction of mechanisms and brakes, faulty rail track, faulty grounding or electrical equipment;

2.2.6. There are no removable lifting devices and containers corresponding to the weight and type of goods being moved, or they are faulty;

2.2.7. The work is carried out without work plans, technological maps, work permits;

2.2.8. Activities not completed safe management works set out in work projects, technological maps, work permits;

2.2.9. Passports of lifting structures or information about its registration with Rostekhnadzor authorities are missing or lost;

2.2.10. Work using lifting structures is carried out in violation of safety rules and instructions, which can lead to an accident or injury to people.

3. Rights

3.1. The specialist responsible for carrying out production control during the operation of lifting structures has the right to:

3.1.1. Visit workshops and areas associated with the operation of lifting structures at any time and check them technical condition, terms of Use. as well as compliance by managers and specialists, and maintenance personnel with safety rules, production instructions and other regulations in the field of industrial safety;

3.1.2. Stop the operation of lifting structures in the cases specified in clause 2.2. this instruction;

3.1.3. Require from technical services enterprises, managers and specialists, presenting documents for verification on issues related to the operation of lifting structures;

3.1.4. Give mandatory instructions to the administration of workshops and departments and set deadlines for eliminating identified violations;

3.1.5. Raise the question to the administration of the enterprise about the removal from carrying out work on the repair and maintenance of lifting structures of persons who violate the requirements of federal and local regulations in the field of industrial safety;

3.1.6. Raise the issue of punishing workers responsible for violations of industrial safety requirements during the operation of lifting structures.

4. Responsibility

4.1. The specialist responsible for carrying out production control during the operation of lifting structures bears responsibility in accordance with current legislation behind.

149. Production control over the safe operation of substations as part of a hazardous production facility must be carried out in accordance with the Rules for the organization and implementation of production control over compliance with industrial safety requirements at a hazardous production facility, approved by resolution Government of the Russian Federation dated March 10, 1999 N 263 (Collection of Legislation of the Russian Federation, 1999, N 11, Art. 1305; 2005, N 7, Art. 560; 2013, N 31, Art. 4214).

150. Operating organizations are obliged to ensure that the substation is maintained in working order and safe conditions their work by organizing proper supervision and maintenance, technical inspection and repair.

For these purposes there should be:

a) a procedure has been established for periodic inspections, maintenance and repairs to ensure the maintenance of the substation, rail tracks, load-handling devices, devices and containers in working order;

B) provided established order certification (specialists) and admission to independent work(personnel) with the issuance of appropriate certificates, which indicate the type of substation, as well as the types of work and equipment for which they are allowed to work;

D) job descriptions for specialists and production instructions for personnel, magazines, programs for carrying out scheduled preventative maintenance, PPR, TC, slinging and storage schemes have been developed;

e) ensuring that specialists have real FNP, job descriptions and guidelines for the safe operation of the substation, and for personnel - production instructions;

f) conditions have been created for specialists to strictly comply with the requirements of these FNP, job descriptions, and for staff to comply with production instructions.

151. The number of specialists of the operating organization should be determined by the administrative act of the operating organization, taking into account the requirements of subparagraph "g" of paragraph 23 of these FNP, as well as taking into account the number and actual operating conditions of the substation.

152. During vacation, business trip, illness or other cases of absence responsible specialists The fulfillment of their duties is assigned by the administrative act of the operating organization to the employees who replace them in their positions, who have the appropriate qualifications, who have undergone training and certification.

153. Periodic testing of knowledge of job descriptions and these FNPs among specialists responsible for carrying out production control during the operation of the substation, specialists responsible for maintaining the substation in working condition, and specialists responsible for the safe performance of work must be carried out in accordance with the administrative act of the operating organization and carried out by its commission.

154. To manage the substations and their maintenance, the operating organization is obliged to appoint, by administrative act, lift drivers, crane operators (operators), their assistants, slingers, mechanics, electricians, cradle workers and adjusters (except for adjusters of specialized organizations involved).

Workers from other organizations who meet the requirements set forth in the manual (instructions) for operating the lift (tower) may be allowed to work as lift (tower) cradle workers after these workers have been instructed by a specialist responsible for the safe performance of work using PS.

Workers trained in accordance with the requirements set out in the manual (instructions) for the operation of such a substation can be allowed to control the substation from the floor or from a stationary console, and when controlling the substation using a remote control system (via radio), in addition, taking into account requirements set out in the manual (instructions) for operating the remote control system.

155. For control truck crane(manipulator crane), auto hydraulic lift (tower) a vehicle driver can be appointed after he has been trained in the prescribed manner.

(see text in previous edition)

156. In order to ensure industrial safety, the operating organization is obliged to provide personnel with production instructions defining their duties, the procedure for safe work performance and responsibility. Production instructions must be issued to personnel against receipt before they are allowed to work.

157. In cases where the area served by the substation is not completely visible from the control cabin (from the control place), and in the absence of radio or telephone communication between the operator (crane operator) and the slinger, an operator (crane operator) must be assigned to transmit the signal signalman from among the slingers. Such signalmen are appointed by a specialist responsible for the safe performance of work using PS.