The program of production control over compliance with sanitary rules and the implementation of sanitary and anti-epidemic (preventive) measures of the organization. Typical production control program at the enterprise
Question from Irina
Hello Anton, tell me about the production control program. Contents of the PPC. Who is developing it? Do you need this program coordinate with Rospotrebnadzor? Sincerely, Irina.
Reply to Irina
Greetings!
Decree of the Chief State Sanitary Doctor of the Russian Federation dated July 13, 2001 No. 18 (as amended on March 27, 2007) “On the Enactment of the Sanitary Rules - SP 1.1.1058-01” (together with “SP 1.1.1058-01. 1.1. General Issues Organization and implementation of production control over compliance with the Sanitary Rules and the implementation of sanitary and anti-epidemic (preventive) measures. Sanitary Rules, approved by the Chief State Sanitary Doctor of the Russian Federation on July 10, 2001) (Registered in the Ministry of Justice of the Russian Federation on October 30, 2001 No. 3000)
is compiled by a legal entity, an individual entrepreneur before the commencement of activities. Necessary changes, additions to the production control program are made when changing the type of activity, production technology, other significant changes in the activities of a legal entity, an individual entrepreneur.
Developed production control program (plan) is approved by the head of the organization, an individual entrepreneur or duly authorized persons - those. the legislator does not require the coordination of the production control program with the Federal Service for Supervision of Consumer Rights Protection and Human Welfare (Rospotrebnadzor).
Measures for the production control carried out by legal entities and individual entrepreneurs. Responsibility for the timeliness of the organization, completeness and reliability of the ongoing production control is borne by legal entities, individual entrepreneurs.
Legal entities and individual entrepreneurs provide information on the results of production control institutions of the Federal Service for Supervision of Consumer Rights Protection and Human Welfare (Rospotrebnadzor) at their request.
Requirements for a production control program
Production control program is drawn up in any form and must include the following data:
1. A list of officially issued sanitary rules, methods and techniques for monitoring environmental factors in accordance with the activities carried out;
2. List of officials (employees) who are entrusted with the functions of exercising production control;
3. A list of chemicals, biological, physical and other factors, as well as production control objects that pose a potential hazard to humans and their environment (control critical points), for which it is necessary to organize laboratory studies and tests, indicating the points at which sampling (laboratory studies and tests are carried out), and the frequency of sampling (laboratory studies and tests) *;
4. List of positions of employees subject to medical examinations, professional hygienic training and certification;
5. A list of works and services carried out by a legal entity, an individual entrepreneur, manufactured products, as well as types of activities that pose a potential danger to humans and are subject to sanitary and epidemiological assessment, certification, licensing;
6. Measures that provide for the justification of the safety for humans and the environment of products and their production technology, criteria for the safety and (or) harmlessness of factors in the production and environment and the development of control methods, including during storage, transportation, sale and disposal of products, as well as safety of the process of performing work, providing services;
7. List of accounting and reporting forms established by the current legislation on issues related to the implementation of production control;
8. A list of possible emergency situations related to production shutdowns, violations of technological processes, other situations that pose a threat to the sanitary and epidemiological well-being of the population, in the event of which the population, local authorities, bodies and institutions of the Federal Service for Surveillance in the Sphere of Consumer Rights Protection and human well-being (Rospotrebnadzor);
9. Other measures, the implementation of which is necessary for effective control over compliance with sanitary rules and hygiene standards, the implementation of sanitary and anti-epidemic (preventive) measures. The list of these measures is determined by the degree of potential danger to a person of the activity (work performed, service provided) carried out at the facility of production control, the capacity of the facility, and possible negative consequences of violations of sanitary rules.
That's all.
To be continued...
Question from Irina
Hello Anton, tell me about the production control program. Contents of the PPC. Who is developing it? Do you need this program coordinate with Rospotrebnadzor? Sincerely, Irina.
Reply to Irina
Greetings!
Decree of the Chief State Sanitary Doctor of the Russian Federation dated July 13, 2001 No. 18 (as amended on March 27, 2007) “On the Enactment of the Sanitary Rules - SP 1.1.1058-01” (together with “SP 1.1.1058-01. 1.1. General Issues Organization and implementation of production control over compliance with the Sanitary Rules and the implementation of sanitary and anti-epidemic (preventive) measures. Sanitary Rules, approved by the Chief State Sanitary Doctor of the Russian Federation on July 10, 2001) (Registered in the Ministry of Justice of the Russian Federation on October 30, 2001 No. 3000)
is compiled by a legal entity, an individual entrepreneur before the commencement of activities. Necessary changes, additions to the production control program are made when changing the type of activity, production technology, other significant changes in the activities of a legal entity, an individual entrepreneur.
Developed production control program (plan) is approved by the head of the organization, an individual entrepreneur or duly authorized persons - those. the legislator does not require the coordination of the production control program with the Federal Service for Supervision of Consumer Rights Protection and Human Welfare (Rospotrebnadzor).
Measures for the production control carried out by legal entities and individual entrepreneurs. Responsibility for the timeliness of the organization, completeness and reliability of the ongoing production control is borne by legal entities, individual entrepreneurs.
Legal entities and individual entrepreneurs provide information on the results of production control institutions of the Federal Service for Supervision of Consumer Rights Protection and Human Welfare (Rospotrebnadzor) at their request.
Requirements for a production control program
Production control program is drawn up in any form and must include the following data:
1. A list of officially issued sanitary rules, methods and techniques for monitoring environmental factors in accordance with the activities carried out;
2. List of officials (employees) who are entrusted with the functions of exercising production control;
3. A list of chemicals, biological, physical and other factors, as well as production control objects that pose a potential hazard to humans and their environment (control critical points), for which it is necessary to organize laboratory studies and tests, indicating the points at which sampling (laboratory studies and tests are carried out), and the frequency of sampling (laboratory studies and tests) *;
4. List of positions of employees subject to medical examinations, professional hygienic training and certification;
5. A list of works and services carried out by a legal entity, an individual entrepreneur, manufactured products, as well as types of activities that pose a potential danger to humans and are subject to sanitary and epidemiological assessment, certification, licensing;
6. Measures that provide for the justification of the safety for humans and the environment of products and their production technology, criteria for the safety and (or) harmlessness of factors in the production and environment and the development of control methods, including during storage, transportation, sale and disposal of products, as well as safety of the process of performing work, providing services;
7. List of accounting and reporting forms established by the current legislation on issues related to the implementation of production control;
8. A list of possible emergency situations related to production shutdowns, violations of technological processes, other situations that pose a threat to the sanitary and epidemiological well-being of the population, in the event of which the population, local authorities, bodies and institutions of the Federal Service for Surveillance in the Sphere of Consumer Rights Protection and human well-being (Rospotrebnadzor);
9. Other measures, the implementation of which is necessary for effective control over compliance with sanitary rules and hygiene standards, the implementation of sanitary and anti-epidemic (preventive) measures. The list of these measures is determined by the degree of potential danger to a person of the activity (work performed, service provided) carried out at the facility of production control, the capacity of the facility, and possible negative consequences of violations of sanitary rules.
That's all.
To be continued...
To ensure safe working conditions, production control is mandatory at the enterprise. And the law obliges organizations and individual entrepreneurs, according to a pre-approved plan, to carry out a list of activities, the purpose of which is to create harmless conditions for employees. Who draws up the program (plan) of production control and what to include in it, read the article.
Who needs a production control plan
Based on Federal Law No. 52 of March 30, 1999, a production control program must be drawn up at all enterprises, regardless of the type of activity, form of ownership and other characteristics. Its task is to help organizations check how sanitary rules and hygiene standards are observed, sanitary and anti-epidemic measures are being taken.
It is necessary to approve such an action plan before the start of the enterprise's activities. In some companies, it will be indefinite. It is necessary to change and supplement it according to the law only in the following cases:
- the type of activity has changed;
- the production technology has been improved or changed;
- the list of materials used has changed.
Many are interested in who should draw up a production control program. Given that such work requires knowledge of both the current sanitary standards and the specifics of production, the task of drawing up an action plan is given to a well-trained person who has undergone certain training. In large companies, this is done by labor protection specialists who, even without the Internet, know whether workplaces are objects of production control. Small organizations and individual entrepreneurs can apply for a similar service to third parties. Sometimes it is much more profitable than independently studying all the information about the sanitary standards in force in a particular area and developing a full-fledged document.
What should be included in the control plan
A sample of the production control program at the enterprise 2019 (general form) is available for download at the end of the article. It contains all the necessary items that must be present in the document:
- a list of sanitary rules and methods of analysis in force in a particular area;
- list of responsible persons who carry out control activities;
- a list of potentially dangerous factors, objects and works in production, possible emergencies;
- an indication of positions for which a medical examination, hygienic training, certification is mandatory;
- measures to justify and ensure safe working conditions;
- a list of materials for accounting for ongoing activities and reporting to government agencies.
When preparing a document, one should be guided by the letter of Rospotrebnadzor dated April 13, 2009 No. 01 / 4801-9-32. It presents a typical production control program, including a list of measurements and studies, for enterprises:
- Catering;
- Food Industry;
- consumer services;
- organizations engaged in food trade;
- medical institutions.
At the same time, the letter from Rospotrebnadzor lists facilities where it is not necessary to conduct laboratory and instrumental studies. Among them are offices, pharmacies, cinemas, hotels, shops selling industrial products.
For the lack of a program will be punished
There is no separate article in the current legislation under which the organization or its head would be held liable for the lack of a production control plan. Therefore, after inspections, Rospotrebnadzor can choose one or more "suitable" articles of the Code of Administrative Offenses of the Russian Federation. Among the most likely:
- paragraph 3 of Art. 5.27.1 of the Code of Administrative Offenses of the Russian Federation - admission to work duties of persons who have not passed a medical examination;
- Art. 6.3 of the Code of Administrative Offenses of the Russian Federation - violation of the requirements for ensuring the sanitary and epidemiological welfare of citizens;
Production control on labor protection at the enterprise is a set of actions (including laboratory research and testing) to assess compliance with sanitary rules and the implementation of sanitary and anti-epidemic (preventive) measures.
The primary duty of the employer in relation to the staff is to create a safe working environment. To do this, a set of measures for labor protection is carried out. One of its important components is production control. Taking measures to organize labor protection is also the responsibility of the administration ( Art. 212 of the Labor Code of the Russian Federation).
Laws regulating the organization of control
Production control ensures compliance with the standards established by legislative acts and labor protection requirements; carried out at the enterprise, regardless of the results of the assessment of working conditions, the presence or absence of exceeding the norms of exposure to harmful factors.
The organization of the assessment of working conditions at the enterprise is regulated by four regulations (the last two are for hazardous production facilities):
- Federal Law No. 52-FZ dated March 30, 1999;
- Sanitary rules SP 1.1.1058-01 "Organization and conduct of production control ...", approved on 10.07.2001;
- Federal Law No. 116-FZ dated July 21, 1997;
Objects
The obligation to conduct verification of compliance with the joint venture rests with all employers, without exception, whether they are legal entities or individual entrepreneurs. The objects of verification, according to clause 2.3 of SP 1.1.1058-01, can be:
- industrial and public premises;
- buildings and constructions;
- sanitary protection zones;
- sanitary protection zones;
- equipment;
- transport;
- technological equipment and processes;
- workplaces;
- raw materials, semi-finished products, finished products and waste.
Depending on the specifics of the structure and scope of activity, each organization has its own list of objects. It defines the frequency of assessment, the methods used, benchmarks and their critical values, as well as responsible persons. From this information, a document is formed, the presence of which is required by labor protection - a production control program.
Who should conduct and what activities to include
The answer to this question is contained in Art. 32 FZ-52. In accordance with this norm, production control is carried out at the following stages of production and sale of goods and services:
- production of products;
- storage;
- transportation;
- vacation;
- performance of work and provision of services.
At the same time, the law states that compliance with sanitary and epidemiological standards and the implementation of preventive measures are being checked. Thus, all enterprises engaged in the production and sale of goods, the provision of services, the performance of work, are required to carry out production control measures. This obligation applies to both legal entities and individual entrepreneurs in order to create proper working conditions for employees.
The list of activities carried out for these purposes:
- laboratory research;
- medical examinations;
- checking the availability of documents, certificates, sanitary rules, etc.;
- analysis of the safety of working conditions, new types of products, technologies;
- reporting on PC and labor protection;
- verification of compliance with sanitary rules, etc.
The list of measures in full is specified in clause 2.4 of SP No. 1.1.1058-01.
In addition, production control is carried out by enterprises operating hazardous production facilities (FZ No. 116-FZ of 07/21/1997). They are required to prepare and maintain a package of documentation, including the provision.
How often
In practice, taking into account the provisions of sanitary norms and rules, the frequency of production control of physical factors is adopted - once a year. The organization may designate the timing and specific timing of activities in the relevant PT program, depending on the nature of the factors to be tested. Law enforcers have not formed a unanimous opinion regarding the frequency. Rospotrebnadzor, in accordance with departmental decisions, does not consider offices to be PC facilities, which is not confirmed by sanitary standards. Some managers, on this basis, independently determine the mandatory nature of inspections, but the supervisory authorities may not agree with such an opinion.
Plan
The program is drawn up by the employer without fail before the start of activities or no later than 3 months from the date of approval of sanitary standards (clause 2.6. SP 1.1.1058-01). The document is drawn up in free form, but it must contain the following lists:
- official sanitary rules and assessment methods in accordance with the activities carried out;
- responsible officials;
- potentially hazardous factors and objects of control;
- positions subject to medical examinations, professional hygienic training and certification;
- works and services, potentially hazardous products and activities;
- substantiation of product safety and technology of its production;
- safety criteria, harmlessness of factors of the production environment;
- official forms of accounting and reporting;
- possible emergencies due to production shutdown, violations of technological processes.
What is measured
Need to research:
- noise level;
- the presence of ionizing radiation, electromagnetic fields;
- the presence of ultrasonic and infrasonic, mechanical vibrations;
- degree and quality of illumination;
- the ratio of local and general vibration;
- microclimate parameters.
Responsible
The head of the organization has the right to assign the responsibility for supervision over compliance with sanitary rules to an employee of the enterprise that meets the requirements of the law. In accordance with Art. 217 of the Labor Code of the Russian Federation, the employer is obliged to introduce the position of labor protection engineer if the minimum number of employees is 50 people. Recommendations for the organization of this unit are contained in the Decree of the Ministry of Labor of the same name dated February 8, 2000 No. 14. It contains the widest list of functions of labor protection specialists, which is not limited to supervision. For example, the labor protection department also approves a report on production practice.
The responsibility for organizing events lies with the ecologist, health worker, it is also included in the professional standard of an OT specialist. Controlling and responsible persons must have special knowledge, the availability of which is confirmed by the relevant documents.
Section 1 of the Letter of Rospotrebnadzor dated 04/13/2009 No. 01/4801-9-32 lists enterprises that must necessarily perform laboratory and instrumental control (LIC) as part of production control. These include housing and communal services organizations, beauty salons, public catering organizations, service and trade companies, etc. All firms not listed in this letter may be limited to the results of SOUT.
Result
All results of the inspection of working conditions are recorded in a special journal, the form of which is an annex to the control program. This document should be in every organization. It records the results of inspections, analyzes their compliance or non-compliance with established standards. A voluminous document in A4 format must be laced and numbered. It is mandatory to indicate the record number, the object of verification and the date of the event. It is forbidden to remove sheets during amendments.
If violations are detected, the employer is obliged to take the measures provided for by the current legislation to eliminate them and prevent their recurrence (clause 5.1 of SP 1.1.1058-01). Information on the results of control is provided by an individual entrepreneur or a legal entity at the request of the authorities authorized to exercise state sanitary and epidemiological supervision.
Responsibility for violations
In the absence of local regulations confirming the implementation of production control measures, the organization may be held administratively liable for Art. 6.3 Administrative Code of the Russian Federation. Fines for citizens and individual entrepreneurs range from 100 to 500 and from 500 to 1000 rubles. Legal entities may be fined from 10,000 rubles to 20,000. It is also possible to apply such punishment as an administrative suspension of activities for up to 90 days.
Production control at the enterprise is carried out in order to create the working conditions required by law. It is part of a set of measures for labor protection.
Programproduction control over compliance with sanitary rules and
implementation of sanitary and anti-epidemic (preventive) measures of the organization *
Approved
director of the branch of OJSC "TGC-4"
"Belgorod regional generation"
6. General provisions
6.1. The production control program determines the procedure for organizing and conducting production control over compliance with sanitary rules and the implementation of sanitary and anti-epidemic (preventive) measures and provides for the obligations of the organization's officials to comply with the requirements of sanitary rules. 6.2. Working conditions, workplace and labor process should not have a harmful effect on a person. Requirements for ensuring safe working conditions for a person are established by sanitary rules and other regulatory legal acts of the Russian Federation. 6.3. Officials (heads of structural divisions of the organization) are obliged to exercise general control over the implementation of sanitary and anti-epidemic (preventive) measures to ensure safe working conditions for humans and the requirements of sanitary rules and other regulatory legal acts of the Russian Federation related to production processes and technological equipment, organization of workers places, collective and individual means of protection of workers, the regime of work, rest and welfare of workers, in order to prevent injuries, occupational diseases, infectious diseases and diseases (poisoning) associated with working conditions. 6.4. Working conditions with machines, mechanisms, installations, devices, devices that are sources of physical factors affecting a person (noise, vibration, ultrasonic, infrasonic effects, thermal, ionizing, non-ionizing and other radiation) should not have a harmful effect on a person. 6.5. Criteria for safety and (or) harmlessness of working conditions with sources of physical factors affecting a person, incl. maximum permissible levels of exposure are established by sanitary rules. 6.6. The use of machines, mechanisms, installations, devices and devices, as well as the production, application (use), transportation, storage of substances, materials and wastes that are sources of physical factors affecting humans, are allowed if there are sanitary and epidemiological conclusions on the compliance of working conditions with sources physical factors of human impact on sanitary rules.7. The procedure for organizing and conducting production control
7.1. Production control over compliance with sanitary rules and the implementation of sanitary and anti-epidemic (preventive) measures (hereinafter referred to as production control) is carried out by officials of structural divisions and the administration of the organization, who are entrusted with the functions of exercising production control by order of the production unit in accordance with their activities to ensure monitoring compliance with sanitary rules and hygiene standards, the implementation of sanitary and anti-epidemic (preventive) measures. 7.2. The purpose of production control is to ensure the safety and (or) harmlessness for humans and the environment of the harmful effects of objects of production control through the proper implementation of sanitary rules, sanitary and anti-epidemic (preventive) measures, organizing and monitoring their compliance. 7.3. The objects of production control are production, public premises, buildings, structures, sanitary protection zones, equipment, transport, technological equipment, technological processes, workplaces used to perform work, provide services. 7.4. Production control includes: 7.4.1. Availability of officially published sanitary rules, methods and techniques for monitoring environmental factors in accordance with the activities carried out. 7.4.2. Implementation (organization) of laboratory research and testing. 7.4.3. Organization of medical examinations. 7.4.4. Control over the availability of certificates, sanitary and epidemiological conclusions, other documents confirming the quality, safety of raw materials, semi-finished products, finished products and technologies for their production, storage, transportation, sale and disposal in cases stipulated by applicable law. 7.4.5. Substantiation of the safety for humans and the environment of new types of products and the technology of its production, safety criteria and (or) harmlessness of industrial and environmental factors and the development of control methods, including during storage, transportation and disposal of products, as well as the safety of the work process, provision of services. 7.4.6. Keeping records and reporting established by the current legislation on issues related to the implementation of production control. 7.4.7. Timely informing the population, local authorities, bodies and institutions of the State Sanitary and Epidemiological Service of the Russian Federation about emergencies, production shutdowns, violations of technological processes that pose a threat to the sanitary and epidemiological well-being of the population. 7.4.8. Visual control by specially authorized officials (employees) of the organization for the implementation of sanitary and anti-epidemic (preventive) measures, compliance with sanitary rules, development and implementation of measures aimed at eliminating the identified violations. 7.5. Laboratory studies and tests are carried out independently or with the involvement of a laboratory accredited in the prescribed manner. 7.6. The production control program is drawn up by officials of structural divisions. Necessary changes, additions to the program (plan) of production control are made when changing the type of activity, production technology, other significant changes in the activities of a legal entity, an individual entrepreneur. 7.7. The developed program (plan) of production control is agreed upon by the head of the Office of Rospotrebnadzor for the Belgorod Region, which carries out state sanitary and epidemiological supervision of the activities of a legal entity and is approved by the head of the organization. 7.8. Measures for conducting production control are carried out by officials of the structural divisions of the organization, which are entrusted with the functions of implementing production control by order of the production unit. 7.9. Structural divisions by territorial affiliation to the control bodies in the field of consumer protection and human well-being provide information on the results of production control at their request. 7.10. At the end of the year, a general report on the implementation of the production control program is submitted to the head of the Office of the Federal Service for Supervision of Consumer Rights Protection and Human Welfare in the Belgorod Region.8. Duties of officials of the structural divisions of the organization, which are entrusted with the functions of exercising production control
8.1. The official, who is entrusted with the functions of exercising production control, upon revealing violations of sanitary rules at the object of production control, must take measures aimed at eliminating the identified violations and preventing their occurrence, including: 8.1.1. Suspend or terminate its activities or the work of individual workshops, sections, operation of buildings, structures / equipment, transport, performance of certain types of work and provision of services. 8.1.2. Stop using in the production of raw materials, materials that do not meet the established requirements and do not ensure the release of products that are safe (harmless) for humans. 8.2. Officials who are entrusted with the functions of implementing production control are required to: 8.2.1. Comply with the requirements of the Production Control Program. 8.2.2. Comply with the requirements of sanitary legislation, as well as resolutions, instructions and sanitary and epidemiological conclusions of officials exercising state sanitary and epidemiological supervision. 8.2.3. Develop and implement sanitary and anti-epidemic (preventive) measures. 8.2.4. To ensure the safety for human health of the work performed and the services provided. 8.2.5. Carry out production control, incl. through laboratory research and testing, compliance with sanitary rules and sanitary and anti-epidemic (preventive) measures in the performance of work and the provision of services, as well as in the production, transportation, storage and sale of products. 8.2.6. Provide hygiene training for employees.9. Responsibility of officials for the implementation
Production control programs
9.1. Overall responsibility for the implementation of the production control program rests with the director of the organization. 9.2. Responsibility for the timeliness of the organization, completeness and reliability of the ongoing production control rests with the heads of structural divisions. 9.3. By order of the organization, officials are appointed to exercise production control over compliance with sanitary rules and the implementation of sanitary and anti-epidemic (preventive) measures. 9.4. For violation of the sanitary legislation for officials who are entrusted with the functions of exercising production control, disciplinary and administrative liability is established in accordance with the legislation of the Russian Federation and the collective agreement of the organization. 10. Activities providing justification
safety for humans and the environment
10.1. Measures that provide justification of human safety are: 10.1.1. Conducting production control over compliance with sanitary and hygienic (preventive) measures by responsible officials. Officials responsible for the implementation of production control are appointed by order (Appendix 2). 10.1.2. Conducting laboratory studies of the influence of substances, biological, physical and other factors on a person. Laboratory studies are given in Appendix 3. 10.1.3. Carrying out periodic medical examinations of personnel employed in hazardous working conditions, in accordance with the requirements of current legislation. The list of occupations of employees subject to periodic medical examinations is presented in Appendix 4. 10.1.4. Issuing cleaning and disinfecting agents to employees. The list of professions of the organization's employees employed in work in conditions of structural pollution, for which the right to receive monthly flushing and neutralizing agents is established, is presented in Appendix 5. 10.1.5. Issuance of milk or other equivalent food products to workers employed in work with harmful working conditions in accordance with the requirements of the law. The list of professions of employees of the organization engaged in work with harmful working conditions, for which the right to issue 0.5 liters of milk or other equivalent products, is presented in Appendix 6. 10.1.6. Issuance of overalls, special footwear and other PPE to employees in accordance with the Model Industry Standards for the free issue of special clothing, special footwear and other personal protective equipment, approved. Decree of the Ministry of Labor of Russia dated 08.12.1997 No. 61, and the collective agreement. 10.1.7. Measurements of atmospheric emissions of pollutants from stationary sources and in the sanitary protection zone. 10.1.8. Network water quality control at facilities operating on an open hot water supply scheme, and facilities that prepare network water for hot water supply. 10.1.9. Quality control of make-up network water during corrective alkalization of water in an open heat supply system with water in a closed heat supply system. 10.1.10. Wastewater quality control in accordance with agreements with water supply and sewerage enterprises. 10.1.11. Control of the discharge of standard clean water into water bodies. 10.1.12. Technical water quality control of artesian wells. 10.1.13. Soil control in the first belt of the zone of sanitary protection of technical water supply sources and fuel oil storage areas. 10.1.14. Prevention of diseases through medical examinations, vaccination of personnel. 10.1.15. Taking measures to prevent possible emergencies that pose a threat to the sanitary and epidemiological well-being of the population. The list of activities is specified in Appendix 7. 10.1.16. Training of personnel in the rules of compliance with the requirements of sanitary legislation and sanitary standards. Personnel training is carried out in accordance with the training program given in Appendix 8. 101.17. Carrying out measures for disinsection and deratization of necessary objects. 10.1.18. Carrying out certification of workplaces for working conditions in accordance with the requirements of current legislation. 10.1.19. Maintaining the order and conditions of the maintenance of the territory, corresponding to sanitary rules. 10.1.20. Compliance with the conditions for the collection, accumulation, removal and disposal of production and consumption waste in accordance with the requirements of sanitary rules. Appendix 1
List of activities of the organization subject to licensing
|
No. p / p |
license number |
License term |
Kind of activity |
Authority that issued the license |
№ _______BELVE | From 01/23/2007 to 11/01/2016 | № _______BEL VE | From 03.05.2007 to 01.01.2015 | For the right to use subsoil | Regional Agency for Subsoil Use for the Central Federal District | No. __________ BEL | From 10/10/2006 to 10/28/2015 | For the right to use a water body | Federal Agency for Water Resources (Rosvodresursy), Donskoy Basin Water Administration | No. __________(LC) | From 06/29/2007 to 06/29/2012 | Operation of chemically hazardous structural facilities | No. _______ (housing and communal services) | From 06/29/2007 to 06/29/2012 | Operation of explosive structural objects | Federal Service for Ecological, Technological and Nuclear Supervision |
Annex 2
ORDER
On the appointment of persons responsible for production control and sanitary condition
| "______" _______________200 _ |
Director of the organization _________________________ Full name
(signature)
Performer_________________________________ Full name
(signature)
Appendix 3
The list of physical factors for which the organization of instrumental studies is necessary, the frequency of studies at the enterprise, according to SP 1.1.1058-01
|
Structural unit, workshop, site, workplace |
Number of employees |
Number of control points |
Name of production factor |
Multiplicity of studies |
1. Management |
1.1. Administration |
PC user |
1.2. Labor protection service |
PC user | Illumination Microclimate EMF | 1 time per year 2 times per year (during cold and warm periods of the year) According to SanPiN 2.2.2/2.4.1340-03 | PC user | 1 time per year 2 times per year (during cold and warm periods of the year) According to SanPiN 2.2.2/2.4.1340-03 |
1.4. Station shift supervisor |
PC user | Illumination Microclimate EMF | 1 time per year 2 times per year (during cold and warm periods of the year) According to SanPiN 2.2.2/2.4.1340-03 | PC user | Illumination Microclimate EMF | 1 time per year 2 times per year (during cold and warm periods of the year) According to SanPiN 2.2.2/2.4.1340-03 |
1.6. office work group |
PC user | Illumination Microclimate EMF | 1 time per year 2 times per year (during cold and warm periods of the year) According to SanPiN 2.2.2/2.4.1340-03 |
2. Transport shop |
PC user | Illumination Microclimate EMF | 1 time per year 2 times per year (during cold and warm periods of the year) According to SanPiN 2.2.2/2.4.1340-03 | Truck crane operator MAZ-5337 with a lifting capacity of 14.0 tons | 1 time per year | Excavator driver | Noise, vibration, carbon monoxide, nitrogen oxide (СО, NO, С1-С9), hazard class 4 | 1 time per year | Tractor driver KMT-1.65 hp | 1 time per year | Car driver | Noise, vibration, carbon monoxide, nitric oxide (СО, NO, С1-С9), hazard class 4 | 1 time per year | Car mechanic | Carbon monoxide, nitric oxide (СО, NO, С1-С9), hazard class 4 | 1 time per year | Electric and gas welder | 1 time per quarter | Iron, 4th grade | 1 time per year | Nickel, 1st class | 1 time per quarter |
3. Service of relay protection, automation and measurements (group for maintenance of RZ and A, group of metrology, isolation and testing, group of RZA, GSK, TsTP and pumping units) |
PC user | 8 | 4 | illumination | 1 time per year | Microclimate | 2 times a year (during cold and warm periods of the year) | EMF | According to SanPiN 2.2.2/2.4.1340-03 | RZiA equipment repair electrician | 10 | 4 | Power frequency EMF |
4. CHP site |
4.1. Fuel shop |
PC user | 10 | 4 | Illumination Microclimate EMF | E1251B excavator driver, bucket capacity 1.25m 3 | Noise, vibration, carbon monoxide, nitric oxide (СО, NO, C1-C9), hazard class 4 | 1 time per year | Bulldozer driver T-170, T-130, T-100hp | Noise, vibration, carbon monoxide, nitric oxide (СО, NO, C1-C9), hazard class 4 | 1 time per year | Fuel supply driver (first lift) | 1 time per year | bunkerer | Noise, vibration (general), coal dust | 1 time per year | Diesel locomotive driver TGM-4, power 750 hp | Noise, vibration, carbon monoxide, nitric oxide (CO, NO, C1-C9), hazard class 4 | 1 time per year | Pumping unit operator | 1 time per year | Illumination Microclimate Noise Oil aerosol | 1 time per year 2 times per year 1 time per year 1 time per year | Electric and gas welder | Manganese, 2nd hazard class | 1 time per quarter | Iron, 4th hazard class | 1 time per year | Nickel, 1st hazard class | 1 time per quarter |
Gas service |
| Mechanic for the operation and repair of gas equipment | 5 | 2 | illumination | 1 time per year |
| Microclimate | 2 times per year | |||
| Noise | 1 time per year | |||
| Carbon monoxide, 4th hazard class | 1 time per year | 1 time per quarter | Manganese, 2nd hazard class | 2 times per year | Iron, 4th hazard class | 1 time per quarter | Nickel, 1st hazard class | 1 time per quarter |
4.2. Boiler and turbine shop |
PC user | 3 | 1 | Illumination Microclimate EMF | 1 time per year 2 times per year (during cold and warm periods of the year) According to SanPiN 2.2.2/2.4.1340-03 | Senior Boiler Engineer | 5 | 1 | Illumination Microclimate Noise Vibration Thermal radiation | 1 time per year 2 times per year 1 time per year 1 time per year 1 time per year | Boiler driver | 10 | 1 | 6 | 1 | Power Plant Equipment Maintenance Technician | 5 | 1 | Electric and gas welder | 1 | 1 | Manganese, 2nd hazard class | 1 time per quarter | Iron, 4th hazard class | 1 time per year | Nickel, 1st hazard class | 1 time per quarter |
Turbine department |
PC user | Illumination Microclimate EMF | 1 time per year 2 times per year (during cold and warm periods of the year) According to SanPiN 2.2.2/2.4.1340-03 | Illumination Microclimate Noise Vibration | 1 time per year 2 times per year 1 time per year 1 time per year | Steam turbine driver | Power Plant Equipment Maintenance Technician |
4.3. electrical workshop |
PC user | Illumination Microclimate EMF | 1 time per year 2 times per year (during cold and warm periods of the year) According to SanPiN 2.2.2/2.4.1340-03 | Electrician for the maintenance of electrical equipment of a power plant | 1 time per year 2 times per year 1 time per year 1 time per year | Accumulator | H 2 SO 4 (for alkaline batteries, alkali is measured) | 2 times per year | Illumination Microclimate | 1 time per year 2 times per year | Electrician for the repair of electrical equipment of a power plant | Power frequency EMF | 1 time per year 2 times per year 1 time per year 1 time per year |
4.4. Thermal automation and measurement shop |
PC user | Illumination Microclimate EMF | 1 time per year 2 times per year (during cold and warm periods of the year) According to SanPiN 2.2.2/2.4.1340-03 | Electrician for the maintenance of automatic machines and measuring instruments of a power plant | Illumination Microclimate Noise | 1 time per year 2 times per year 1 time per year | Wrapper for electric machine elements | Illumination Microclimate | 1 time per year 2 times per year |
5. Chemical shop |
PC user | Illumination Microclimate EMF | 1 time per year 2 times per year (during cold and warm periods of the year) According to SanPiN 2.2.2/2.4.1340-03 | HVO operator | Alkali, 2nd hazard class | 1 time per quarter | Electric and gas welder | Manganese, 2nd hazard class | 1 time per quarter | Iron, 4th hazard class | 1 time per year | Nickel, 1st hazard class | 1 time per quarter | Power Plant Equipment Maintenance Technician | Illumination Microclimate Noise Hydrochloric acid, hazard class 2 | 1 time per year 2 times per year 1 time per year 1 time per quarter | Alkali, 2nd hazard class | 1 time per quarter |
Express laboratory |
Chemical analysis laboratory assistant | Illumination Microclimate Noise Hydrochloric acid, hazard class 2 | 1 time per year 2 times per year 1 time per year 1 time per quarter | Alkali, 2nd hazard class | 1 time per quarter |
Water-oil laboratory |
Chemical analysis laboratory assistant |
Ecoanalytical laboratory |
Chemical analysis laboratory assistant |
Department of the shop of small boiler houses |
HVO operator |
Branch of the boiler house in the village of Zhuravliki |
HVO operator |
Branch of the boiler house, Troitsky settlement |
HVO operator | Chemical analysis laboratory assistant |
Department of thermal networks |
Chemical analysis laboratory assistant | 2 | 1 | “-” |
6. Section of heat networks |
PC user | 1 time per year 2 times per year (during cold and warm periods of the year) According to SanPiN 2.2.2/2.4.1340-03 | Heat network maintenance fitter | Illumination Microclimate Noise | Heating point operator | Illumination Microclimate Noise | 1 time per year 2 times per year 1 time per year |
6.1. Repair and construction group |
Insulator on thermal insulation | Mineral wool dust | 1 time per year | Assembler for the installation of steel and reinforced concrete structures | Illumination Microclimate Noise | 1 time per year 2 times per year 1 time per year |
7. Electrical service |
PC user | Illumination Microclimate EMF | 1 time per year 2 times per year (during cold and warm periods of the year) According to SanPiN 2.2.2/2.4.1340-03 |
Electrical department |
Electrician for repair and maintenance of electrical equipment | 18 | 3 | 1 time per year 2 times per year 1 time per year 1 time per year |
Department of instrumentation and automation |
Electrician for the repair and maintenance of automatic machines and measuring instruments of a power plant |
Department of instrumentation and automation of t / set and public sector |
Electrician for the repair and maintenance of automatic machines and measuring instruments of a power plant |
8. Boiler area |
PC user | Illumination Microclimate EMF | 1 time per year 2 times per year (during cold and warm periods of the year) According to SanPiN 2.2.2/2.4.1340-03 |
Department of city boiler houses |
Illumination Microclimate Noise | 1 time per year 2 times per year 1 time per year | Electric and gas welder | Manganese, 2nd hazard class | 1 time per quarter | Iron, 4th hazard class | 1 time per year | Nickel, 1st hazard class | 1 time per quarter | Boiler operator | 1 time per year 2 times per year 1 time per year 1 time per year |
Department of rural boiler houses |
Equipment Service Technician | Manganese, 2nd hazard class | 1 time per quarter | Iron, 4th hazard class | 1 time per year | Nickel, 1st hazard class | 1 time per quarter | Boiler operator | Illumination Microclimate Noise Thermal radiation | 1 time per year 2 times per year 1 time per year 1 time per year |
Electrotechnical group |
Mechanic for instrumentation | Illumination Microclimate Noise | 1 time per year 2 times per year 1 time per year | Illumination Microclimate Noise Power frequency EMF | 1 time per year 2 times per year 1 time per year 1 time per year |
gas section |
Illumination Microclimate Noise Carbon monoxide, hazard class 4 | 1 time per year 2 times per year 1 time per year 1 time per year | Nitrogen oxides, hazard class 3 | 1 time per quarter | Manganese, 2nd hazard class | 2 times per year | Iron, 4th hazard class | 1 time per quarter | Nickel, 1st hazard class | 1 time per year |
HVO Group |
Chemical water treatment operator | Illumination Microclimate Noise Hydrochloric acid, hazard class 2 | 1 time per year 2 times per year 1 time per year 1 time per quarter | Alkali, 2nd hazard class | 1 time per quarter |
Appendix 4
List of positions of employees subject to periodic medical examination
|
№ |
Name of professions |
Occupational hazard |
Number of persons |
Periodicity |
| Accumulator | Sulfur and its compounds: sulfur oxides, sulfuric acid | 1 time per year | ||
| HVO operator (3rd category) | Chemicals: alkalis, caustic acids, ammonia, HC1 | Annually | ||
| bunkerer | coal dust | Annually | ||
| Car driver | Noise, vibration, eye strain | Annually | ||
| Car mechanic (4th category) | Carbon monoxide, nitric oxide | Annually | ||
| Dispatcher | PC screen tracking | Annually | ||
| Master | High and low temperatures, forced position of the body | 1 time in 2 years | ||
| Carbon fiber materials (glass fiber, mineral wool), aromatic hydrocarbons - benzene and its derivatives, phosphorus and its compounds (phosphoric acid) | Annually | |||
| Alkali metals and their compounds | 1 time in 2 years | |||
| Crane operator | Annually | |||
| Work as a crane operator (clause 1.1) | Annually | |||
| Excavator driver | Vibration, noise, attention | Annually | ||
| Work at height (clause 1 of Appendix 2) | 1 time in 2 years | |||
| Pumping unit operator | Occupational noise, general vibration | Annually | ||
| PC personnel | Work with personal computers of persons professionally associated with their operation | Annually | ||
| Vehicle service mechanic | High and low temperatures, forced position of the body | 1 time in 2 years | ||
| Power Plant Equipment Maintenance Technician | Noise, methane gas, CO2 | 1 time in 2 years | ||
| Mechanic for instrumentation | 1 time in 2 years | |||
| Locksmith for the operation and repair of gas equipment (4th category) | Gas, methane, CO 2 | 1 time in 2 years | ||
| Electric and gas welder | Welding aerosols (clause 3.9 of Appendix 1) | Annually | ||
| Electrician for maintenance and repair of electrical equipment | Work on operational maintenance and repair in existing electrical installations | 1 time in 2 years | ||
| Electrician for maintenance of electrical equipment of a power plant (3rd category) | Work on operational maintenance and repair in existing electrical installations | 1 time in 2 years | ||
| Electrician for the repair of RZiA equipment (3rd category) | Work on operational maintenance and repair in existing electrical installations | 1 time in 2 years | ||
| Work on operational maintenance and repair in existing electrical installations | 1 time in 2 years | |||
| Electrician for the repair and maintenance of automatic machines and measuring instruments of a power plant (2nd category) | Work on operational maintenance and repair in existing electrical installations | 1 time in 2 years | ||
| Bulldozer driver T-170, T-130, T-100 HP | Noise, vibration, carbon monoxide, nitric oxide (CO, NO, C 1 -C 9) | Annually | ||
| Boiler operator, senior operator | Annually | |||
| Engineer-crawler for boiler equipment (3rd category) | Noise, gas, methane, CO 2 , coal dust | Annually | ||
| Turbine Equipment Crawler (3rd category) | Noise, gas, methane, CO 2 , coal dust | Annually | ||
| Steam turbine driver (4th category), senior turbine driver | Noise, gas, methane, CO 2 , coal dust | Annually | ||
| Fuel supply operator (first lift) (3rd category), Scraper winch operator | coal dust | Annually | ||
| locomotive driver, assistant locomotive driver | Locomotive vibration | Annually | ||
| Laundry and clothes repairman | Vibration, noise | 1 time in 2 years | ||
| Boiler room operator (2nd category) | Noise, gas, methane, CO2 | Annually | ||
| Heat point operator (2nd category) | Noise, gas, methane | Annually | ||
| Industrial and office cleaner | 1 time in 2 years | |||
| Tractor driver KMT-165 hp (4th category) | Noise, vibration, carbon monoxide, nitric oxide (CO, NO, C 1 - C 9) | Annually | ||
| Turner (4th category) | Metal dust, noise, lighting, microclimate | 1 time in 2 years |
Appendix 5
The list of professions of employees of the organization engaged in work in conditions of industrial pollution, for which the right to monthly receipt of flushing and neutralizing agents has been established
|
No. p / p |
Production, profession, work |
Name of funds |
Issuance rate per month, g |
| Accumulator | |||
| Chemical water treatment operator (for the preparation of chemical reagents) | |||
| bunkerer | |||
| Car driver | |||
| gas cutter | |||
| Loader | |||
| Electrician on duty | |||
| Boiler house electrician on duty | |||
| Street cleaner | |||
| Warehouse Manager | |||
| Head of the household | |||
| chemical engineer | |||
| Environmental Analytical Laboratory Chemical Engineer | |||
| Electrical laboratory engineer | |||
| Insulator on thermal insulation | |||
| Test Engineer | |||
| Relay engineer | |||
| Fireman | |||
| Storekeeper | |||
| Mason | |||
| Boiler cleaner | |||
| Chemical analysis laboratory assistant | |||
| Aerial platform operator | |||
| Bulldozer driver | |||
| Truck crane operator | |||
| Pumping unit operator | |||
| Excavator driver | |||
| Nurse | |||
| Technological equipment installer | |||
| fuel delivery driver | |||
| The Machinist of a diesel locomotive | |||
| Boiler operator | |||
| Steam turbine driver | |||
| Turbine equipment operator | |||
| Compressor unit operator | |||
| Overhead crane operator | |||
| Boiler equipment operator | |||
| Fuel supply master (KTC, boiler room) | |||
| Mechanic of the fuel and transport shop | |||
| Mechanic | |||
| Master of the chemical workshop | |||
| Electrical equipment repairman | |||
| Machinist (worker) for washing and repairing overalls | |||
| Electrical laboratory master | |||
| Boiler house electrical shop master | |||
| Gas service master | |||
| Scraper winch fuel feeder | |||
| Master | |||
| Boiler driver | |||
| Power unit machinist | |||
| Turbine equipment operator | |||
| Head of district, department | |||
| Station shift supervisor | |||
| Chemistry shift supervisor | |||
| Boiler room manager | |||
| Head of gas service | |||
| Electrical shop shift supervisor | |||
| Head of Ecological Analytical Laboratory | |||
| Electrical Machine Wrapper | |||
| Heating point operator | |||
| Boiler operator | |||
| A carpenter | |||
| carpenter | |||
| Heating network maintenance locksmith | |||
| Heating substation service technician | |||
| Car mechanic | |||
| Boiler repairman | |||
| Repairman | |||
| Mechanic for instrumentation | |||
| Slinger | |||
| Mechanic for the operation and repair of gas equipment | |||
| Fuel supply equipment repairman | |||
| Senior boiler equipment operators | |||
| plumber | |||
| Senior turbine operator | |||
| Power plant equipment maintenance fitter | |||
| Senior driver | |||
| Mechanical assembly fitter | |||
| Toolmaker | |||
| Turner | |||
| tractor driver | |||
| Cleaner of office and industrial premises | |||
| milling machine | |||
| Grinder | |||
| Plasterer | |||
| Electric and gas welder | |||
| Electrician for repair and maintenance of electrical equipment | |||
| Power station maintenance electrician | |||
| Electrician for the repair of relay protection equipment | |||
| Forwarder | |||
| Electrician | |||
| Electrician for maintenance of electrical equipment of power plants | |||
| Electrician for maintenance of electrical equipment of power plants | |||
| Electrician for the repair of relay protection and automation equipment | |||
| Electrician for the maintenance of automation and measuring instruments | |||
| Electrician for the repair and maintenance of automation and measuring instruments | |||
Appendix 6
List of professions of employees of the branch of the organization, employed in work with harmful working conditions, for which the right to issue 0.5 liters of milk or other equivalent products has been established
|
No. p / p |
Name of profession, position |
Harmful factors |
| Accumulator | Sulfur and its compounds (sulfur oxides, sulfuric acid) | |
| Operator for the preparation of chemical reagents | ||
| Chemical water treatment operator of a power plant | Compounds with hydrogen (hydrochloric acid) | |
| bunkerer | ||
| Mobile gas station driver | Mixture of hydrocarbons (petrols) | |
| gas cutter | Sulfur content, halogens and halogen derivatives | |
| gas electric welder | Hydrocarbons saturated and unsaturated (propane, ethylene, propylene) | |
| Deputy head (boiler department) | Carbon dust (when running on solid fuel) | |
| Deputy Head (Fuel Shop) | Carbon dust (when operating on solid fuel), saturated hydrocarbons (when operating on fuel oil) | |
| Insulator on thermal insulation | Carbon fiber materials (glass fiber, mineral wool), aromatic hydrocarbons (benzene and its derivatives), phosphorus and its compounds (phosphoric acid) | |
| Chemical plant engineer | Compounds with hydrogen (hydrochloric acid) | |
| Industrial Ecoanalytical Laboratory Engineer | Compounds with hydrogen (hydrochloric acid) | |
| Test Engineer | ||
| Electrical laboratory engineer | Rosin, organic solvents | |
| Boiler cleaner (when working on solid fuel and when performing boiler cleaning work) | Carbon dust (when running on solid fuel) | |
| Chemical analysis laboratory assistant | Compounds with hydrogen (hydrochloric acid) | |
| Master of production and chemical laboratory | Compounds with hydrogen (hydrochloric acid) | |
| Master of the fuel shop (boiler shop, department) | Carbon dust (when operating on solid fuel, fuel oil), saturated hydrocarbons (when operating on fuel oil) | |
| fuel delivery driver | Carbon dust (when running on solid fuel) | |
| Bulldozer driver | ||
| Boiler driver | ||
| Crawler | Carbon dust (when operating on solid fuel), saturated hydrocarbons (when operating on fuel oil) | |
| Boiler operator (fireman) | Carbon dust (when running on solid fuel) | |
| Crane operator | Carbon dust (when running on solid fuel) | |
| Technological equipment installer | Sulfur compounds, halogens and halogen derivatives, saturated and unsaturated hydrocarbons (propane, ethylene, propylene) | |
| Assembler for the installation of steel and reinforced concrete structures | ||
| Compressor unit operator (on days of actual employment with harmful substances) | Hydrogen compounds (hydrochloric acid), saturated hydrocarbons | |
| Foreman | Carbon dust (when running on solid fuel) | |
| Head of the fuel department | Limit hydrocarbons | |
| Head of the boiler and turbine shop | Carbon dust (when running on solid fuel) | |
| Head of production eco-analytical laboratory | ||
| Worker performing gas-cutting and electric welding works | Sulfur compounds, halogens and halogen derivatives | |
| Workers working on solid fuel equipment | Carbon dust (when running on solid fuel) | |
| Workers employed in works with the use of bituminous mastics (for actual hours worked) | hydrocarbons | |
| Heating network maintenance locksmith | Sulfur compounds, halogens and halogen derivatives | |
| Mechanic-repairman of production and chemical laboratory | Compounds with hydrogen (hydrochloric acid) | |
| Metal fabrication fitter | Sulfur compounds, halogens and halogen derivatives | |
| Automotive mechanic (employed in the repair of internal combustion engines, radiators) | Lead and its compounds, methanol | |
| Equipment repairman | Carbon dust (when running on solid fuel) | |
| Equipment Service Technician | Limit hydrocarbons | |
| Senior boiler room operator | Carbon dust (when running on solid fuel) | |
| Steam and gas turbine equipment repairman | Limit hydrocarbons | |
| Fuel supply repairman | Limit hydrocarbons | |
| Steam and gas turbine equipment repairman | Compounds with hydrogen (hydrochloric acid) | |
| Fuel Mechanic | Limit hydrocarbons | |
| Mechanic for the repair of boiler rooms and dust preparation shops | Limit hydrocarbons | |
| Steam and gas turbine equipment repairman | Limit hydrocarbons | |
| Senior driver | Carbon dust (when running on solid fuel) | |
| Power Plant Equipment Maintenance Technician | Carbon dust (when running on solid fuel) | |
| Mechanic for the operation and repair of gas equipment | Gas, hydrocarbons | |
| Turner | ||
| Grinder | Metal carbonyls, organic silicon compounds (silanes) | |
| Hand welding electric welder | Sulfur compounds, halogens and halogen derivatives | |
| Electric and gas welder | Sulfur compounds, halogens and halogen derivatives | |
| Electrician for repair and maintenance of instrumentation | Sulfur compounds, halogens and halogen derivatives | |
| Test and measurement electrician | ||
| Electrician for maintenance of electrical equipment of power plants | organic solvents | |
| Electrician for the repair of relay protection equipment | Rosin, organic solvents | |
| Electrician for the repair of electrical machines | organic solvents | |
| Electrician for the repair and installation of cable lines | Hydrocarbons (propane), lead and its compounds, methanol |
Appendix 7
List of possible emergencies that pose a threat to the sanitary and epidemiological well-being of the population
1. Accidents on railway transport transporting dangerous goods to the facility. 2. Accidents in road transport carrying dangerous goods. 3. Straits of sulfuric acid on the ground. 4. Violations of the operating modes of the equipment, which caused the excess of emissions and discharges of harmful substances into the environment in comparison with the maximum established values by 5 MPE or 3 MPD, lasting more than 1 day. 5. Destruction of structures or technical structures used at hazardous facilities. 6. Damage to power equipment that led to a forced shutdown for a period of more than 25 days. 7. Gust, crack of a ground gas pipeline. 8. Rupture of the gasket in the flanges of the GRU fittings. 9. Rupture of the joint or rupture of the laying of the intrashop gas pipeline with a strong release of gas and the danger of its ignition. 10. Fire dangerously close to gas equipment. 11. Cracks, breaks in the oil tank and damage to the bunding when filling the tank with fuel oil. 12. Fire at the oil pumping station. 13. Spreading of sulfuric acid along the flange connection of the stop valves on the secondary valve when unloading from the tank. 14. Explosion in the boiler furnace with damage to the screen pipes, lining and fire. 15. Rupture of fuel oil pipeline and fuel oil spill. Appendix 8
The program of theoretical training of personnel in the rules of sanitary legislation and compliance with the requirements of sanitary standards
Explanatory note
This training program was developed by the organization's occupational safety service. The program is designed to train persons responsible for the implementation of production control over compliance with sanitary and hygienic (preventive) measures, and production personnel of the structural divisions of the organization. Training is carried out at the introduction of the Production Control Program and periodically before the next test of knowledge. The program provides for the study of the main requirements: Federal Law of March 30, 1999 No. 52-FZ "On the sanitary and epidemiological well-being of the population"; SP 1.1.1058-01 "Organization and conduct of production control over compliance with sanitary rules and the implementation of sanitary and anti-epidemic (preventive) measures; SanPiN 2.2.1 / 2.1.1.1200-03 "Sanitary protection zones and sanitary classification of enterprises, structures and other objects "; SanPiN 2.2.4.548-96 "Hygienic requirements for the microclimate of industrial premises"; SanPiN 2.1.4.1110-02 "Zones of sanitary protection of water supply sources and drinking water pipelines"; SP 4723-88 "Sanitary rules for the design and operation of centralized hot water supply systems" ; SP 2.2.2.1327-03 "Hygienic requirements for the organization of technological processes, production equipment and working tools"; GN 2.2.5.1313-03 "Maximum permissible concentrations (MPC) of harmful substances in the air of the working area"; SanPiN 2.1.4.1074-01 " Drinking water. Hygienic requirements for water quality of centralized drinking water supply systems. Quality control"; SanPiN 2.2.2/2.4.1340-03 "Hygienic requirements for personal electronic computers and organization of work"; SanPiN 2.2.0.555-96 "Hygienic requirements for working conditions for women". theoretical knowledge necessary for personnel to exercise production control over compliance with sanitary and hygienic (preventive) measures and compliance with sanitary standards and requirements by production personnel.The results of theoretical training are recorded in the Theoretical Training Journal.
Thematic plan for theoretical training in the rules of sanitary legislation and the implementation of the requirements of sanitary standards
|
№ |
Subject |
Number of hours |
| Fundamentals of sanitary legislation | ||
| State regulation in the field of ensuring sanitary and epidemiological welfare of the population | ||
| Theoretical and legal foundations of production control over compliance with sanitary rules and the implementation of sanitary and anti-epidemic (preventive) measures. Production control at the organization's facilities | ||
| Rights and obligations of legal entities and individual entrepreneurs in the field of ensuring sanitary legislation. Responsibility for sanitary offenses | ||
| Prevention of infectious diseases | ||
| Organization and conduct of disinfection activities | ||
| Working conditions | ||
| Prevention of occupational diseases and poisoning | ||
| Cleaning of territories and premises | ||
| General requirements for the normalization of physical factors | ||
| Water supply of populated areas. Sewerage | ||
| Organization and implementation of production control over compliance with standardized environmental parameters | ||
| Sanitary and hygienic requirements for workshops | ||
| Soil protection from pollution | Collection and disposal of solid household, liquid and food waste | TOTAL |
Theoretical training program on the rules of sanitary legislation and the implementation of the requirements of sanitary standards
Subject 1. Basicssanitarylegislation
Normative and legal acts in the field of ensuring the sanitary and epidemiological welfare of the population. Normative and legal acts in the field of environmental protection necessary to ensure the sanitary and epidemiological welfare of the population. Normative and legal acts in the field of labor protection aimed at ensuring the sanitary and epidemiological welfare of the population.
Topic 2. State regulation in the field of security
sanitary and epidemiological welfare of the population
Sanitary and anti-epidemic (preventive) measures and sanitary and hygienic regulation as an integral part of the activities carried out by legal entities in order to ensure the sanitary and epidemic well-being of the population. State sanitary and epidemiological regulation, development, approval and implementation of sanitary rules. State sanitary and epidemiological supervision, goals, objectives and implementation procedure. Organization of licensing of activities that pose a potential danger to humans. Sanitary and epidemiological examinations, investigations, examinations, studies, tests and toxicological, hygienic and other types of assessments. Sanitary and hygienic monitoring, concept, goals and objectives. Organization of informing the population about the occurrence of infectious diseases, mass non-communicable diseases.
Topic 3. Theoretical and legal foundations of production control over compliance with sanitary rules and the implementation of sanitary and anti-epidemic (preventive) measures. Production control at the organization's facilities
The concept of production control over compliance with sanitary rules and the implementation of sanitary and hygienic (preventive) measures, goals, objectives and methods for its implementation. Tasks of legal entities and individual entrepreneurs in organizing production control. Rights and obligations of officials and specialists exercising production control. State supervision over the activities of legal entities and individual entrepreneurs in the implementation of production control. Production control planning. Rights and obligations of officials and specialists exercising production control. State supervision over the activities of legal entities and individual entrepreneurs in the implementation of production control by bodies and institutions of Rospotrebnadzor. The procedure for organizing and conducting production control over compliance with sanitary rules at the organization's facilities.
Topic 4. Rights and obligations of legal entities and individual entrepreneurs in the field of ensuring sanitary legislation
Responsibility for sanitary offenses. Control over compliance with sanitary legislation, sanitary and anti-epidemic (preventive) measures, instructions and resolutions of officials exercising state supervision. Responsibility for committed violations of sanitary legislation (criminal, administrative, disciplinary). Preventive measures for violations of sanitary legislation (prescriptions, resolutions, etc.), the procedure for their application and execution. Goals, objectives and organization of control over the sanitary and epidemiological situation.
Topic 5. Prevention of infectious diseases
The concept of an infectious disease, epidemic process and sources of infection. General principles for the classification of infectious diseases. Ways and mechanisms of transmission of infectious diseases. Acute intestinal diseases and food poisoning. Prevention measures. Socially significant infectious diseases. Preventive actions. Polluted water as a source of infectious diseases.
Topic 6. Organization and conduct of disinfection activities
The concept of disinfection, deratization and disinsection. General requirements for disinfection, disinsection and deratization works. Preventive disinfection, disinsection and deratization, conditions for their implementation. The epidemiological significance of waste (the possibility of survival of microorganisms in it). The role of waste in the development of helminth eggs and reproduction of flies. Flies are carriers of pathogens of infectious diseases. Accumulation of garbage as a reason for increased reproduction of rodents. The role of rodents in the spread of infectious diseases. Modern disinfectants, indications for their use. The procedure for accounting and spending disinfectants. Organization and procedure for sanitary certification of objects subject to disinfection, disinfestation and deratization. First aid measures for poisoning with disinfectants.
Topic 7. Working conditions
Harmful and dangerous factors (their role in the formation of general and occupational pathology in workers). Methodology for assessing working conditions (in terms of harmfulness and danger of factors in the working environment, severity and intensity of the labor process, classification of working conditions). Control over the working conditions of certain contingents of workers (women, adolescents, disabled people).
Topic 8. Prevention of occupational diseases and poisoning
Measures to reduce the incidence. Preliminary and periodic medical examinations of employees. Medical examination. Women's health care.
Topic 9. Cleaning of territories and premises
Yard cleaning. Cleaning time. Protection of air from pollution. The harmful effects of dust. Green spaces, the participation of janitors in their protection and care. Requirements for cleaning equipment, storage, care.
Topic 10. General requirements for the normalization of physical factors
Requirements for the levels of noise, vibration, ultrasound and infrasound, electrical and electromagnetic vibrations and ionizing radiation in the premises of residential buildings.
Topic 11. Water supply. Sewerage
Tasks, hygienic value. Sanitary and hygienic requirements for drinking water. The concept of the device of centralized water supply. Control measures for the safety of the water supply network. Device. Operating requirements.
Topic 12
Hygienic requirements for ventilation, heating and air conditioning.
Topic 13. Sanitary and hygienic requirements for workshops
Locksmith workshops. Carpentry workshops.
Topic 14. Soil protection from pollution
The main means of protecting soil from pollution. Wastes of production and consumption. Waste classification. Waste disposal.
Topic 15. Collection and disposal of solid domestic, liquid and food waste
requirements for waste bins. Requirements for transport for waste disposal. Goals and objectives of cleaning, washing and disinfection of places where garbage containers are placed.
- What not to eat after 60 years
- Presentation on the topic: "lesson topic: forms of perpetuating the memory of Russian soldiers, the war has passed, the suffering has passed, but the pain calls to people: let's, people, never forget about it!
- Retro Makeup 60s Makeup
- Face laying Face laying of brick walls
- Brief passive participle returned
- What kind of girls do guys like
- What is ovulation: its signs, how to calculate the day of onset
- Pyramid and truncated pyramid
- How to lay a facing brick with your own hands
- Fifteen of the best quests in the history of games Humorous quests in Russian
- Fairy Games Other Fun with Tinker Bell
- Application for games android on computer bluestacks
- "Rudolf" - the meaning of the name, the origin of the name, name day, zodiac sign, talisman stones
- All ways to determine the sex of the child during pregnancy
- "Council of People's Commissars" - and who is it?
- Ramses II. Family of Ramesses II. Nefertari - Queen of Egypt and places associated with her The mystery of the origin of Nefertiti
- Alans: who are they? Alans. Who are they? Alans in Crimea: the history of settlement
- Pregnancy after the cancellation of OK - the consequences of discontinuation Is it possible to get pregnant after taking hormonal
- Hannibal and Scipio Africanus: the battle of two brilliant warriors
- Publius Cornelius Scipio Africanus